41cx synthetic and over clock


I am rediscovering my cx...it died sometime ago and my 11c works for all that I use a 'calculator' for.
11c stories at a later date.

1) I was unaware of the ability to overclock...does this apply to the late model 41cx "no-nut"? details or location of said details would be cool.
2) Which cap holds the memory...it seems that a bridge on this cap With Out the Batteries would be quite effective at resetting the machine.
2) Does the 41cx still have the 'bugs' needed to make synthetic programming work?
3) I assume that the right digging on this site will hepl me get started with synth-(prog.http://www.hpmuseum.org/prog/synth41.htm)
4) There seem to be at least 2 important modules for this... the PPC and the one from germany, are these available at all?


In the halfnut, I believe that you need to discharger at least the
470uF electrolytic capacitor, and maybe the 33uF one as well to
remove the memory supply. Certainly discharging both of them should do it. I'd use a 1k resistor rather than
just shorting them out, though, to avoid damage from a possible high-current spike.
2) As far as I know, synthetic programming works on all 41s, including halfnuts and CXs. The important 'bugs' (the ability to edit a key
assignment register from the keyboard, and the fact that some combinations of prefix and postfix bytes do interesting things)
are there on all HP41s.
4) There were several ROMs to help with synthetic programming -- the most famous being the PPC ROM, the CCD ROM (that's the 'german one' you mentioned) and the UK ZenROM.
None of them are essential -- you can do synthetic programming with a bare HP41. Conversely, you can also do it the way I do it (I have none of the above ROMs), namely either creating barcodes of programs with synthetic instructions on another machine and
reading them with the wand, or creating the program in binary on another machine and downloading it using e.g. the
HP82164 RS232 interface and the Extended I/O function INP. There
are many ways to do it...

Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Prime - Revision Suggestion - Setting the Clock Bill Triplett 5 1,290 11-15-2013, 12:36 AM
Last Post: Joe Horn
  Non-Prime question alert: Hp-41 and synthetic instructions Marcel Samek 11 2,199 11-04-2013, 09:31 PM
Last Post: sjthomas
  Prime incase anybody missed the clock Dougggg 5 1,213 10-19-2013, 04:05 PM
Last Post: Geoff Quickfall
  Using your HP-65 as a clock! Don Shepherd 24 3,706 10-08-2013, 11:53 AM
Last Post: Don Shepherd
  WP-34s clock program Andrew Nikitin 8 1,555 06-09-2013, 11:20 PM
Last Post: Andrew Nikitin
  Cool math clock Bruce Bergman 28 4,144 04-10-2013, 03:13 AM
Last Post: Siegfried (Austria)
  hp clock does not talk to hp 71 Hans Holzach 15 2,204 07-29-2012, 04:13 PM
Last Post: Hans Holzach
  HP-67 and Synthetic Programming Matt Agajanian 3 873 05-11-2012, 04:37 AM
Last Post: Olivier De Smet
  OT: Mechanical CPU clock Ethan Conner 1 675 04-19-2012, 01:23 AM
Last Post: Mike Morrow
  [WP34s] Accurate Clock Katie Wasserman 1 625 04-08-2012, 01:25 AM
Last Post: Walter B

Forum Jump: