Scratches on aluminum bezel



#5

Just purchased an old 15C from eBay and the unit has some abrasions (fine horizontal scratches) on the aluminum bezel. Is there a polish anyone would recommend that might work to remove / buff out and restore the shine to bezel? I know there are hundreds of cleaners/polishes out there to choose from... thought someone might have tried this before and had success with a particular brand. I don't want to degrade the finish any further by experimenting. Thanks


#6

Mike,

I had a 11C that was heavily scratched and marred. I carefully taped up the display and plastic surfaces and used ultra fine steel wool and was able to polish out the scratches with alum wheel car polish. I sold the unit last year on e-bay. It came out quite nice. Use magic tape or electrical tape and carefully mask off plastic and display.

Good luck, use tender loving care and patience. The bezel is easily damaged.

Regards,

Andy


#7

Hello Andy,

I did a thing like that on a 11C, but there was also a transparant varnish (paint) on the Bezel. Did you repaited it ?. If yes how, with what ?

Thanks

Ronald


#8

Ronald,

I did not repaint it. I left it with a sort of yellowish hue, almost gold. I had to use the steel wool over ALL the alum surfaces to even it out.

Regards,

Andy


Possibly Related Threads...
Thread Author Replies Views Last Post
  Prime screen scratches - Use a screen protector Eelco Rouw 11 2,620 11-19-2013, 10:16 PM
Last Post: Eddie W. Shore
  DM-1x Silver vs. DM-1xCC Aluminum quality? bhtooefr 11 2,668 04-14-2013, 07:08 PM
Last Post: bhtooefr
  Glue for HP42S bezel Basil 0 676 08-08-2012, 12:23 PM
Last Post: Basil
  Hp 12C replacement bezel James Nelis 0 715 04-06-2012, 06:37 AM
Last Post: James Nelis
  Deep Drawn Aluminum Sources Hugh Evans 11 2,379 11-22-2011, 02:24 AM
Last Post: David Griffith
  Fixing the bezel on a 10C Keith Midson 8 1,961 09-03-2011, 05:00 PM
Last Post: Dan W
  Bezel exchange hp 12C Diehl-Peshkur 2 920 05-16-2011, 11:37 AM
Last Post: Diehl-Peshkur
  Light Scratches on 12c Bezel - Steel Wool? Matt_12c 4 1,401 04-10-2011, 01:36 PM
Last Post: Matt_12c
  HP-97 Aluminum Printer Gear aj04062 4 1,237 09-16-2010, 07:31 PM
Last Post: aj04062
  removing alluminium bezel (was restoring an HP11C) Alberto Fenini 2 985 05-24-2010, 04:21 PM
Last Post: Alberto Fenini

Forum Jump: