HP <--> PC ?



#2

Many HP handhelds have RS-232 ports (albeit with nonstandard pinouts). Most new computers don't have RS-232 ports, only USB.
Anybody have any good recommendations for connecting the two? I really don't want to have to copy stuff to a floppy, go to another computer, and then transfer from the floppy to the HP (and vice versa).

Thanks.
KA


#3

There are USB->RS232 converters available for a few bucks.

Thomas


#4

Do you or anyone else have any experience using such a converter with an HP handheld? Do they work well enough?


#5

No experience to speak from here, but two companies I know of that make the interface converters are B&B Electronics www.bb-elec.com and Sealevel Systems www.sealevel.com .


#6

Hi,

I currently use Radio Shack's USB/DB9 converter. This one works under Windows XP and Linux. Under Windows, I can transfer files with my HP38G, HP48S/SX/G/G+/GX, and my HP95LX using Hyperterminal. Under Linux, I use CKermit.

If you have any specific questions, feel free to ask.

Han


#7

I have the same adapter and it works very well. I use it to connect my Garmin GP12 to my PC.

Fred

#8

No, but what I've seen is one converter that _starts_ at 1200 Bit/s. I don't remember what the 48 series needs (and have currently no access to the manual) but that might be a problem. But that one was cheap, less than 5 EUR. Other converters I saw went up to 30EUR and more so this limit might not apply to these expensive models.

Thomas

#9

There are also PCI serial or serial+centronics boards for a few bucks. This one $14 but cheaper at a big box electronics store:


http://www.buyextras.com/serialcards.html

#10

I also have used the Radio Shack USB>Serial adapter on XP. It works just fine with my HP 200LX. I'm using the PC connectivity application for the 200LX, connecting the special 200LX to serial to the USB>Serial and all is well. It shows up as COM4: on my PC.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Getting out of the PC market? Richard Garner 32 4,995 08-19-2011, 03:49 PM
Last Post: Massimo Gnerucci (Italy)
  HP 41 to PC possible? SpeedyVV 4 1,083 08-26-2010, 11:52 PM
Last Post: DavidShenk
  Electri-Calc LT bill platt 6 1,488 12-04-2008, 11:26 PM
Last Post: bill platt
  PC power > HP-calc power, yet... $PC = $HP48gx ECL 7 1,467 12-03-2006, 08:04 PM
Last Post: Tim Wessman
  [OT] PC-1360 PC-1600 gileno 5 1,303 06-26-2006, 09:46 AM
Last Post: Etienne Victoria
  HP-71B and PC Fabio Albonico 5 1,052 12-24-2005, 05:17 AM
Last Post: Tony Duell
  HP Integral PC Andre Koppel 2 730 07-26-2004, 11:48 PM
Last Post: Andre Koppel
  HP to PC Andre Schan 2 618 04-06-2004, 06:40 AM
Last Post: J-F Garnier
  HP 85A PC Elton Matheson 0 430 02-25-2004, 03:55 PM
Last Post: Elton Matheson
  PC/MCA and PC/ISA How do I know which I have? bowdoin Davis 1 633 06-03-2003, 11:07 AM
Last Post: Ellis Easley

Forum Jump: