Classic model silver trim repair lesson



#2

I have been repairing the worn-down silver trim on a number of the Classic models in my collection, here is what I learned.

A) Where to find the paint for the repair
My first visit was a model shop, thinking they would have the best paint selection. They have a good selection with expert advice, but I found them to be no match with craft shops like Hobby Lobby. I heard art supply stores are also a good source.

B) Paint applicator
I tried the finest brush, Q-tip squeezed into cone-shape with a sharp point (a model trick), pointed paint pen, and chiseled paint pen. The chiseled paint pen is by far the best method, giving consistent smooth lines.

C) Testors paint
I first tried Testors silver enammel paint. I found the silver to be a little dull, and it rubs off even after a day of drying. You need to clear coat it to prevent silver fingers.

D) The best solution I found (so far)
I came across a paint pen called "Silver Leafing Pen" by Krylon. It has a chisel point, which makes application extremely easy and even. The paint has a shinier apperance, a better match to the chrome than Testors. Best of all, after a day of drying, it stays on much better. No silver finger, making the clear coat optional. For $5, it is by far the best solution I found so far.

E) Other options I have not tested
I also saw chrome paint in a spray bottle, it is supposed to give an even closer match to the original chrome. But you would have to spray it into a small cup, then apply it with an applicator of your choice. Besides, I do not know if it will react with the hard plastic, so I never explored that option.

Hope you find the information useful in restoring your Classic HPs.


#3

Excellent information Gordon. I will be trying this on my 67 at some point in the future.

BTW, I have read here in the past, but don't recall any resolution - does anyone know how to restore the coloured letters on my beloved HP's? Is there an easy (read - even a non-handyman type person can do it) way to restore them?

#4

Has anyone tried the silver leaf found a Hobby Lobby, etc..? You prepaint an adhesive to the surface to be finished, and then press the leaf onto the glue. I think this is the process, but I haven't tried it yet. It's the same stuff they use for embossing a name on the cover of a Bible, and that stays forever (so to speak).


Possibly Related Threads...
Thread Author Replies Views Last Post
  A Wonderful Classic HP Calculator BShoring 2 244 11-22-2013, 05:25 PM
Last Post: BShoring
  Classic battery polarity Kiyoshi Akima 2 263 11-08-2013, 01:31 AM
Last Post: Kiyoshi Akima
  HP-97 Service Manual, newer model davorin 6 346 09-16-2013, 10:45 AM
Last Post: davorin
  CLASSIC/SPICE KEY LEGENDS Mike T. 2 227 08-21-2013, 04:53 PM
Last Post: Mike T.
  Woodstock, Classic & Spices for iPhone Matt Agajanian 8 491 07-10-2013, 06:10 PM
Last Post: BShoring
  DM-1x Silver vs. DM-1xCC Aluminum quality? bhtooefr 11 517 04-14-2013, 07:08 PM
Last Post: bhtooefr
  HP 41c with white trim instead of yellow Jose Gonzalez Divasson 2 178 02-01-2013, 07:47 PM
Last Post: Massimo Gnerucci (Italy)
  Classic calculator display chip type number? Juergen Hofstaedter 3 246 01-22-2013, 12:47 PM
Last Post: Eric Smith
  Official released of the TI-84 Plus C Silver Edition Mic 12 534 01-21-2013, 01:38 PM
Last Post: Eric Smith
  3D Model - HP 50g 49G+ 39G+ 48Gii JJB299 3 256 01-18-2013, 11:51 PM
Last Post: Raymond Del Tondo

Forum Jump: