HP 15C Keyboard



#3

I have an HP 15C which passes all the tests but the 9 key sometimes doesn't register or puts 2 nines in the display. I'm reluctant to open it up but would consider it. Does anyone have any suggestions ?

Thanks


#4

If the key clicks okay and has the normal travel, it should be fine.


This is an adaptation from many posts from MoHPC regular David Smith:

"Your most likely problem is a dirty switch contact for the 9 key. These can be cleaned fairly easily if you open up the machine (one screw under each rubber foot).

Beneath each key dome is a tiny hole in the circuit board. Make a tiny wire brush out of three wire brush bristles twised together, mounted in a pin vise, and trimmed square. Place a drop of 91% isopropyl alcohol on the hole, dip the wire brush in more alcohol, and gently "scritch" around in the hole with the brush. In stubborn cases you may have to repeat a few times."

For more on how to open: http://www.hpmuseum.org/disasm.htm

Good luck, post again if you need more help.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Keyboard fix for the HP 15C LE Jeff Raines 2 410 03-31-2012, 12:49 AM
Last Post: Jeff Raines
  15C keyboard question Matt Agajanian 7 733 03-28-2012, 02:18 AM
Last Post: Dwight Sturrock
  Keyboard fix for the HP 15C LE? Jeff Raines 4 506 03-23-2012, 10:54 AM
Last Post: Jeff Raines
  HP 15C LE: keyboard problems dietmar13 4 545 02-09-2012, 11:04 AM
Last Post: Bart (UK)
  15C LE keyboard fixed, plus: about the feet Dale Reed 2 389 01-15-2012, 04:24 AM
Last Post: Reth
  15c vs. 15cLE keyboard Ethan Conner 1 343 01-05-2012, 09:26 PM
Last Post: Michael de Estrada
  Photo of my HP 15c | 15c LE DigiGal 2 540 10-12-2011, 12:34 PM
Last Post: DigiGal
  15C Keyboard Issues [UPDATE- DO NOT EMAIL ME] Tim Wessman 16 1,350 10-03-2011, 06:55 PM
Last Post: uhmgawa
  HP 15c LE vs HP-15C dimensions - BOTH ARE HUGE! Joerg Woerner 4 703 10-03-2011, 06:53 AM
Last Post: Jim Johnson
  HP 15C and 15C LE not the same dimensions? Derek 16 1,544 09-30-2011, 05:33 PM
Last Post: Derek

Forum Jump: