is this normal in a repaired 41CX?



#5

I have an HP41CX fullnut I repaired (changed bad memory chip, only 255 registers instead 319 registers) Now the repaired 41CX has 319 registers and 124 extended registers, the time clock works OK.
The problem is after not using the calculator for 1-2 days (without batteries), when I put batteries, the screen shows all characters @, "@@@@@@@@@@@@", twelve @ characters. After this, pressing the backspace keys, the calculator powers off. From this point, I can turn on the calculator (ON key, the screen shows 0.0000) but I cannot do a reset (ON + backspace), only after 1-2 minutes I can do a reset (ON + backspace) and the calculator works perfectly.

What is due the initial showing (twelve @ characters) when I put batteries after not using the calculator for 2 days and stored without batteries? I´m sure that is not due to a bad contact between the two halves of the calculator.


#6

Hola Gonzalo!

I once got a 41CX fullnut for repair, with the display showing '@@@@@@@@@@' and I think the buzzer hummed a bit when switching on. I measured the signal lines and I think two of them had very low signal (about 200 mV if I recall correctly), and much noise on them. Since I did not have any replacements (As the lines connect CPU,RAM and ROM, any of the chips could have had a defect), I gave it back to the owner and he wanted to sell it on ebay.

I was also sure it weren't the contacts, as I opened the case an clamped the boards together with a 'monkey wrench?' (<= correct word???).

Perhaps you bad memory chip shorted some signal to ground and thereby damaged another chip? I think you should check your signals if you have access to a scope.

Good luck!


#7

Quote:
I was also sure it weren't the contacts, as I opened the case an clamped the boards together with a 'monkey wrench?' (<= correct word???).

This is a monkey wrench:

I think the word you were looking for is "vise":


#8

Thanks Thomas,

'vise' was the word!

wise advise! Klaus


Possibly Related Threads...
Thread Author Replies Views Last Post
  Repaired HP-97 card reader doesn't show any signs of life jbssm 6 622 02-17-2013, 03:15 AM
Last Post: Alberto Fenini
  HP-41C partially repaired, help with "ROM", alpha glitches MattMalone 2 289 09-26-2012, 02:26 AM
Last Post: Diego Diaz
  Yet another Normal quantile function for the 34s Dieter 13 769 08-06-2012, 09:15 PM
Last Post: Paul Dale
  Summary: Normal CDF and quantile function Dieter 3 331 05-13-2012, 02:20 AM
Last Post: Paul Dale
  [WP34S] Curious Bug in Inverse Normal Function Les Wright 61 2,404 05-01-2012, 02:44 AM
Last Post: Paul Dale
  32E's Normal & Inverse Normal Distribution Matt Agajanian 27 1,554 04-14-2012, 06:07 PM
Last Post: Dieter
  HP 32sII Integration Error of Standard Normal Curve Anthony (USA) 4 425 03-14-2012, 03:18 AM
Last Post: Nick_S
  Hp 97 needs to be repaired (Ciao Ignazio) aurelio 6 453 10-09-2011, 08:13 PM
Last Post: Michael de Estrada
  A program for Normal Distribution on the 42s snaggs 5 403 09-22-2011, 02:19 PM
Last Post: Dieter
  Already forgot how to use a normal calculator... Brian K 13 809 07-26-2011, 03:02 PM
Last Post: Chris Randle (UK)

Forum Jump: