HP 34C battery pack



#2

I just found my old HP 34c and i am trying to get it up and running. The original battery doesnt seem to want to take a charge. Does anyone know the technical specs for these batteries, and how I might find a modern replacement. thanks.


#3

Just read the recent thread Batteries for 41CV or 33E.

Gerson.

#4

I've been using 2 x AA 1.5v alkalines in my 33E for over 1 year. No problems

This is a quick no fuss fix only. It suits me fine. You can repair the existing pack based on info on this site


Paul


#5

... because they are longer, and depress the curved part of the contacts more. The contacts will fracture along the crease between the riveted flat part and the curved part.

There are two designs of Spice (31/32/33/34/37/38) battery pack; either can be disassembled and rebuilt properly with 1.2V rechargeable flat-top "AA" cells (without posts).

I would eventually like to use Katie Wasserman's procedure to install stronger fabricated contacts, allowing use of either longer 1.5V cells (jumpered by aluminum foil) or a rebuilt pack.

-- KS


#6

Have had no such problems. Contacts have flattened yes, but remain this way with no other forces on them. The pressure of the batteries is very light. They will fracture if bent backwards and then re-flattened continiously, but if they stay as they are, there is no problem. I don't use the re-built pack therefore I never needed to readjust the contacts, therefore no fracture will occur unless I start fiddling with them.
I have had to re adjust contacts in remote controls for eithertv's dvd's or stereo's and I've used pliers to pry them closer to maintain good battery contact and I've never had problems with fractures and some of these remotes are cheap units from China and Taiwan.
My 2 cents worth

Paul


#7

Paul stated,

Quote:
Contacts have flattened yes, but remain this way with no other forces on them. The pressure of the batteries is very light. They will fracture if bent backwards and then re-flattened continiously, but if they stay as they are, there is no problem.

If the contacts have flattened, then some metal fatigue has already taken place. The force of contact using longer cells is certainly higher than intended by design. Certainly, repeated flexing due to continual removal and re-installation of cells would fatigue the contacts faster. If you are using disposables (as indicated by "1.5V") and are also using the calc regularly, replacement will be required. That's why the HP LED-based models were designed for rechargables.

The two HP-34C's I bought on eBay turned out to have fractured battery terminals. I strongly suspect that this was caused by use of longer 1.5V disposables after the US$12 (in the 1980's!) rechargeable pack gave out. One of them was advertised as having good contacts, but one contact simply broke upon a light touch. It looked fine, but clearly was fatigued and cracked.

-- KS


#8

Karl, I'm not debating that with constant bending that the contacts wouldnt break. The original rechargable pack flexes the contacts just like any electronic device that uses metal straps to engage the cells. I've just pressed mine flatter to the point where the AA's press lightly enough to make the contact. We are not talking imence pressure exerted here that flex the contacts millimeters each time they are inserted or removed.
If mine break in the near future, I'll post a log of how long they lasted.
PS The owner of this 33E I own is by coincedent my employer, who happens to be a mechanical Engineer. I did consult his knowledge on what I had done and he believes that the contacts should last once flattened.

Paul


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP-34C Draining battery quickly Bill Crowell 2 1,428 09-08-2013, 08:30 AM
Last Post: aj04062
  HP-34C Curiosity Matt Agajanian 7 2,792 08-23-2013, 06:02 PM
Last Post: Stephan Matthys
  HP 50G Multi Lingual Pack – Polski Software49g 3 1,731 04-10-2013, 10:40 AM
Last Post: Massimo Gnerucci (Italy)
  HP-34C Emulator BShoring 8 2,797 03-30-2013, 05:04 PM
Last Post: BShoring
  HP 41 Battery Pack Rebuild John Ratard 0 2,140 09-29-2012, 01:37 PM
Last Post: John Ratard
  Looking for PRNG for HP-34C Dave Boyd 3 1,649 09-22-2012, 07:10 PM
Last Post: Mike T.
  HP-41 Quiz: How to pack 100k in ROM? (on-line) Ángel Martin 10 2,985 09-02-2012, 10:35 PM
Last Post: Luiz C. Vieira (Brazil)
  Unknown battery pack Nick R 4 1,960 05-27-2012, 01:32 AM
Last Post: Nick R
  Disassemble Battery Pack 82028B (woodstock) Jacques Karensky 0 1,162 05-19-2012, 03:39 AM
Last Post: Jacques Karensky
  HP-34C Storage Register Arithmetic & Programming Matt Agajanian 14 4,308 05-08-2012, 11:04 AM
Last Post: Matt Agajanian

Forum Jump: