Gummy wheel repair , Need O=-ring size



#4

In the repairs section there are two excelet articles on repairing the gummy wheel problem of card readers. Both articles mention using o-rings for the repair but they don't give a size for the o-rings needed.


#5

Fred,

I've tried to measure the ones I've been using successfully. Be mindful that these are made of rubber hence, are a bit difficult to measure.

The ID is from 0.1181" (3mm) to 0.125" (1/8"). I suspect a tight fit would be correct to hold snugly on a 1/8" shaft.

The OD is ~0.250" or 1/4".

Sorry I don't have a gear out right now that I could directly measure for you.

Hope this helps,

Mike

PS If you have any problems finding the ones you need, drop me an email.

#6

The ones I used recently are 1/8 inch inside diameter and 1/4 inch outside diameter. In British Standards this O-ring is designated as BS006 (see here).

Brian Gladman


#7

I've found that '1 size smaller' -- the shop I get them from calls
them 005 (so presumably that is BS005) is a better fit. Something like 7/64" ID.

Size 006 is ideal for the rubber O-rings in a 9100 keyboad BTW.

#8

There is two guys on ebay who sell the rings, one in the US, the other in Italy. In the US, they are USD 5 for 10 pairs of rings, I think. Try http://cgi.ebay.com/HP-Calculator-HP67-HP97-Gummy-Wheel-Repair_W0QQitemZ5823642197QQcategoryZ11713QQrdZ1QQcmdZViewItem
as an example.

If you are interested in pictures to repair HP41 card reader, I could also offer my guide:
HP 41 Card Reader Repair http://www.pmgeiser.ch/calc/index.php?id=HP82104A

Best of luck
Regards
Peter


#9

In the UK I got mine from here, where I got 30 for their minimum order of £5. I bought BS006 O'rings but I am pretty sure they will have the BS005 ones as well.

Brian Gladman

#10

I am now getting the "Malfunction" error message intermittently after a "gummy wheel repair" of two years ago. The cause feels like a misadjustment of the little gold contact switches. Does your guide explain how to make the adjustments for these switches?

Thanks,
Jim Chumbley


Possibly Related Threads...
Thread Author Replies Views Last Post
  Prime: Program size limited to 64K? Erwin Ried 4 264 11-17-2013, 11:42 PM
Last Post: Joseph Ec
  Prime: size display bug when editing large programs BruceH 2 178 10-31-2013, 05:30 PM
Last Post: BruceH
  HP Prime SIZE and OBJ-> with matrices/vectors/lists Helge Gabert 8 392 09-27-2013, 05:44 PM
Last Post: Helge Gabert
  OT: How to get data from WinXP to a full-size PCMCIA SRAM card Gene Wright 10 377 06-25-2013, 08:03 PM
Last Post: gene wright
  [WP34S] Stack size impact on speed? SSIZE4. Chris Tvergard 13 484 05-13-2012, 11:42 AM
Last Post: Chris Tvergard
  HP 30-B size Question Jeff 1 107 01-30-2012, 07:46 PM
Last Post: Mike Morrow
  Gummy wheels for 41 series card readers William L. Drylie 5 206 08-30-2011, 11:26 AM
Last Post: William L. Drylie
  82161A Tape Drive - O-Ring Question Ángel Martin 4 170 06-18-2011, 08:39 AM
Last Post: Ángel Martin
  N Size Cell Charger Gerry Schultz 3 191 06-17-2011, 12:14 PM
Last Post: Gerry Schultz
  Wp34s: word size lost? Cristian Arezzini 5 223 05-26-2011, 12:29 AM
Last Post: Cristian Arezzini

Forum Jump: