41c card reader no drive



#2

Got a good one for y'all.

Just got a card reader for a 41c that pulls cards through when mounted to one calculator, but not when mounted to another one. The card reader functions catalog fine on both calculators. Anybody seen this problem before. I'm thinking I should clean the contacts for expansion bay 4 on the offending calculator with a q-tip and alcohol. Any other ideas appreciated.
Thanks, Hal


#3

Again I am working from memory and don't have the schematic in front of me, but from what I remember, the card reader motor is powered straight off the HP41 battery, not from the logic supply line that's used for all the other chips.

If that contact in Port 4 is dirty/corroded, or if there's a bad connection between the HP41 I/O assembly flexiprint and the keyboard PCB inside the HP41, it's possible that the card reader motor will get no power, but the CAT 2 response will be fine.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Reasonable price for a 41C, Quad Mem, Time, Navigation and Card reader module? Eelco Rouw 10 1,101 12-12-2013, 01:52 AM
Last Post: Eelco Rouw
  hp-67 card reader problem. Marcel Samek 5 668 12-09-2013, 09:09 PM
Last Post: Paul Berger (Canada)
  HP-97 card reader pinch roller axle davorin 2 423 09-15-2013, 08:47 AM
Last Post: aj04062
  HP-97 Card Reader davorin 3 434 09-13-2013, 04:21 PM
Last Post: Stephan Matthys
  HP-67 Card Reader Repair Question aj04062 1 361 08-08-2013, 11:15 AM
Last Post: Randy
  Hp-67 card reader: tantalum capacitor identification Ignacio Sánchez 8 849 06-02-2013, 07:26 PM
Last Post: aj04062
  Testing card reader motor for 65 Michae Altmann 2 401 03-17-2013, 09:24 PM
Last Post: Randy
  Repaired HP-97 card reader doesn't show any signs of life jbssm 6 618 02-17-2013, 03:15 AM
Last Post: Alberto Fenini
  HP 65 card reader problem H Fischer 3 414 11-24-2012, 12:11 PM
Last Post: H Fischer
  9114A Drive aj04062 4 802 11-17-2012, 07:48 PM
Last Post: Raymond Del Tondo

Forum Jump: