HP-41C non working



#3

During last months I have collected some "scrap". I have four HP-41C calculators. One of them works just fine. I can´t turn on the other three. I have tried to swap the CPUs. The result is that the working CPU is ok in any case and the other three don´t work anywhere. So it is clear that the problem is the CPU, not contacts or displays. Any ideas?. May be there is a capacitor or something that fails in this model.
Sorry for my bad english, I hope you understand me.

Thanks in advance


#4

Hi, why you don't try to exchange the memory ICs from one to another?
Best regards
Artur


#5

Hi,

I've seen several malfunctional HP-41 CPU boards.

In most cases so far there were one or more defective memory chips,

in two or three cases a bad ROM chip.

Remarkable is that it always was ROM 1,

or in other words, the second ROM chip.

Too bad one of the boards with a bad ROM chip is a CX:-(

Best Regards

Raymond

#6

Clean the circuit board very thoroughly with 91%+ isopropyl alcohol. Very often several of the chips were hand soldered down and the old solder flux residue causes problems.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Prime Save Power Turn Off Not Working Timothy Roche 12 1,340 10-27-2013, 01:41 PM
Last Post: Michael de Estrada
  Temporary User Mode Key Programs not working in RPN BruceTTT 7 959 10-14-2013, 01:46 PM
Last Post: BruceTTT
  HP-97 suddenly not working Brad Barton 10 998 02-25-2013, 08:15 PM
Last Post: Brad Barton
  [41CL] Problem with PowerCL ... not working Doug (NYC) 5 705 01-22-2013, 07:18 PM
Last Post: Doug (NYC)
  42S exit key not working dwsmith 4 596 11-05-2012, 10:59 AM
Last Post: dwsmith
  HP-46 not working Ignacio Sánchez 1 368 10-24-2012, 11:17 AM
Last Post: Donald Williams
  [WP34s] last QtGui version not working fhub 8 848 08-31-2012, 05:08 PM
Last Post: fhub
  Modfile not working with Win 7 x64 Richard Wagoner 6 723 07-04-2012, 10:32 PM
Last Post: Diego Diaz.
  Working on HP's again Les Koller 49 3,683 06-20-2012, 01:29 AM
Last Post: Thomas Radtke
  held breath, found tapes & drive working Garth Wilson 9 998 06-12-2012, 12:52 AM
Last Post: Garth Wilson

Forum Jump: