HP 65 CARD READER



#4

Hello everyone,
I need your help and advise.
I bought recently an HP 65 with a non operational card reader.
I have changed the gummy wheel , but I noticed that the colored wires (Blue, yellow,red,orange,blue) which connect the head to the circuits are not correctly welded.
I have only this HP 65 and I am not able to compare with another one.
However, I have some HP 67 and I noticed that the circuits are the same between the HP 67 and the HP 65 (i.e c-170 5-61).
As a consequence, could I consider that the "colored wires" have the same positions between the 2 calculators.
Many thanks for your help

Philippe


#5

There were several different versions the HP65 card reader circuit board. The wires were not all in the same positions.

#6

The 65 and 67 readers are electrically much the same, even though they may use different chips (which are pin-compatible). The PCB layouts may be different.

What I would do is trace the connections from the reader head to the IC pins in your 67 using an ohmmeter. Now do the same tracing on the 65 reader board so you know what the 5 pads are and solder the wires down.

IIRC, black is an earthed screening connection

Red and Yellow are one head coil

Blue and Orange are the other coil

But you must get the polarity of the coils right too.

The HP65-Notes file in the articles forum here might give some useful info too.

#7

Tony, David,

Many thanks for your help.

Philippe

#8

Hi again,

Is someone will be so kind to send me some pictures of the card reader for HP 65.
I understand from David and Tony, that there is different models.
Thank you for your help.

Philippe


Possibly Related Threads...
Thread Author Replies Views Last Post
  Reasonable price for a 41C, Quad Mem, Time, Navigation and Card reader module? Eelco Rouw 10 1,592 12-12-2013, 01:52 AM
Last Post: Eelco Rouw
  hp-67 card reader problem. Marcel Samek 5 990 12-09-2013, 09:09 PM
Last Post: Paul Berger (Canada)
  HP-65 short circuit Ignacio Sánchez 2 554 10-22-2013, 08:27 AM
Last Post: Ignacio Sánchez Reig
  HP-65 Video Tapes - Anyone have a Copy? Bill (Smithville, NJ) 3 691 10-09-2013, 07:40 PM
Last Post: Paul Berger (Canada)
  Using your HP-65 as a clock! Don Shepherd 24 2,080 10-08-2013, 11:53 AM
Last Post: Don Shepherd
  HP-97 card reader pinch roller axle davorin 2 577 09-15-2013, 08:47 AM
Last Post: aj04062
  HP-97 Card Reader davorin 3 613 09-13-2013, 04:21 PM
Last Post: Stephan Matthys
  HP-65 to kill... Benoit Maag 11 1,182 08-15-2013, 08:18 PM
Last Post: Jake Schwartz
  HP-67 Card Reader Repair Question aj04062 1 498 08-08-2013, 11:15 AM
Last Post: Randy
  Hp-67 card reader: tantalum capacitor identification Ignacio Sánchez 8 1,189 06-02-2013, 07:26 PM
Last Post: aj04062

Forum Jump: