Need an HP 49g+ Programming hint



#2

Hello!

I would appreciate if anyone could help me out with this little problem I have got... I need to create a quite simple program where I put the figures that represent the coefficients of more than one equations and get the results for each one of them instantaneously. I already know how to work this out when I have one output equation. To make more clear of what I need... let say I need a program that when I fill in the dimensions of a parallelogram (i.e its height and length) I get its area, volume and perimeter and then sum of the perimeter and the area.

Input h: and l:
Output P: A: V: and P+A

Thank you very much for your time in advance!!

Edited: 24 May 2005, 8:55 p.m.


#3

Yiannis

I hope this helps. I am only a relative novice with HP49G+ programming. I must admit it seems quite challenging! The program below finds the area and perimeter of a rectangle and then adds them for given inputs H and L.

<<'H' STO 'L' STO
'2*(H+L)' 'P' STO 'H*L' 'A' STO
<<A>> ->NUM
<<P>> ->NUM
<<'A+P'>> ->NUM
>>

I hope this helps in some way. I do apologise but I do not know how to format the program. Can anyone tell me how to format?

Regards

Chris Dean


#4

Chris Dean wrote:

Quote:
I do apologise but I do not know how to format the program. Can anyone tell me how to format?

Please take a look at "advanced formatting techniques":

http://www.hpmuseum.org/artfmt.htm

For example, if you want to format your program so that it looks like the way it's listed on the 49G+, edit your posting like this:

[pre]
<<'H' STO 'L' STO '2*(H+L)' 'P'
STO 'H*L' 'A' STO
<< A
>> ->NUM
<< P
>> ->NUM
<< 'A+P'
>> ->NUM
>>
[/pre]

Cheers,

Gerson

Edited: 1 June 2005, 10:12 p.m.


#5

Gerson

Thanks for the information

Chris

#6

Yiannis,
Here's an example for a rectangle.
I tried this, and it works:

<<
-> h l << "area" 'h*l' ->NUM
"perim" '(2*h)+(2*l)' ->NUM >>
>>

Don't worry about carriage returns. Type the program exactly as above, and then press ENTER. Type 'yourprogname' and press STO.

To use it, first enter the two values:
val1 SPC val2 and then press the softkey for 'yourprogname' or just type the name and press EVAL.

For example, for my rectangle, I type 3 SPC 4 ENTER and then press the 'yourprogname' softkey.

it outputs:
"area"
12
"perim"
14

Hope this helps,
EL

#7

Hi, Yiannis:

Yiannis posted:

"say I need a program that when I fill in the dimensions of a parallelogram (i.e its height and length) I get its area, volume and perimeter and then sum of the perimeter and the area. Input h: and l: Output P: A: V: and P+A"

Excuse me but I couldn't resist, my mathematical guts just gave a jump upon reading your 'example'. I know that you intend it as just an example, not an actual need, but certainly it was as bad an example as it gets, namely:

  • Giving just height (h) and length (l), there's no way you can compute its volume (V), you need an additional parameter for that, namely the width (w)

  • Computing "sum of the perimeter and the area (P+A)" is absolutely nonsensical, their dimensionality is different and there's no way they can be added up meaningfully. It's like asking for the sum of volts and pounds ! :-)

That said, good luck with your 48/49 programming. For the HP-71B you'd simply use something like this:

10 INPUT H,L
20 P=2*H+2*L
30 A=H*L
40 V=A*W
50 PRINT P,A,V,P+A
Best regards from V.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Now where the heck did this calc come from?...a hint, perhaps? Dallas Osborne 5 1,760 02-04-2008, 09:13 PM
Last Post: Dallas Osborne
  Re: Porting 49G Programs to 49G+/50G Les Wright 0 803 02-21-2007, 10:16 AM
Last Post: Les Wright
  Porting 49G Programs to 49G+/50G Les Wright 6 2,116 02-20-2007, 06:27 PM
Last Post: Tim Wessman
  HP 49g+ programming question Anders 4 1,454 08-14-2006, 05:51 PM
Last Post: Happy HP User
  TI-57 Emulator for HP-48S/SX/G/G+/GX, HP-49G and HP-49G+ is finished HrastProgrammer 9 2,797 01-17-2006, 12:57 AM
Last Post: HrastProgrammer
  HP 49G + Programming help Chris 2 943 05-15-2005, 11:55 AM
Last Post: Marx Pio
  Custom Programming vs. Pre-packaged programming Eddie Shore 3 1,536 01-24-2005, 03:42 AM
Last Post: Karl Schneider
  49G+ programming features Standa(CZ) 4 1,440 06-08-2004, 09:20 AM
Last Post: Standa(CZ)
  HP 49G vs. HP 49G+ Prices Ed Look 5 1,638 10-24-2003, 12:43 AM
Last Post: Ed Look
  HP 49G Keyboard and future HP 49g's Nick Nicholas 1 963 05-31-2003, 10:26 AM
Last Post: R Lion

Forum Jump: