I have the following lines to input:
475 1
476 -1
477 PIXEL
I have no clue on what combination of key strokes causes a '-1' to be displayed on one line. I have tried hitting the 1 and the +/- key, that gives me two lines. I have tried the minus key followed by the number 1 and that also gives me two program lines. I have tried looking in the alpha menus and anything in there will give me the quotes around the -1...
I suspect that the lines 1 and -1 are pixel coordinates for the display so I believe that if I try to fudge this command it will have a very bad consequence.
dannyg77