Emu41 - Advantage - CCD compatibility



#2

With my "Emu41" (thanks Jean-Francois !!!!) I can't work with these settings:

[MODULES]
; page size filename
0 12 Rom41-CX.bin
3 4 XFuns-CX.bin
5 8 Time-CX.bin
6 4 Prter1E.bin
7 4 ILmod-1H.bin
8 8 Ccd-b.bin
A 12 Adv1B.bin

All it's OK if I set only CCD or only Advantage at page 8.

Are CCD and Advantage modules compatible?
Thanks for any info.
(remove all "_NOSPAM_" from my e-mail address)

1234


#3

Sorry for bad layout.

The settings are:

[MODULES]

0 12 Rom41-CX.bin

3 4 XFuns-CX.bin

5 8 Time-CX.bin

6 4 Prter1E.bin

7 4 ILmod-1H.bin

8 8 Ccd-b.bin

C 12 Adv1B.bin

Thanks again


#4

Hi,

my suggestion is to use the CCD OS/X file

from TOS instead of the normal CCD-B.

This way you'll have all the CCD OS extensions nad more,

but without duplicated matrix stuff.

Apart from that, the CCDD (or CCD OS/X)

only uses one 4K block, not two.

Just take a look at TOS (The Other Site)

Raymond

#5

Hi Claudio,

What problem did you get? CCD and Advantage use same ressources (buffer number, X-M files, ...), so it is not recommended to mix matrix functions of both modules. Apart of that, it should possible to install both of them in the same machine.

But I agree with Raymond, the best configuration is CCD OS/X + Advantage.

J-F


#6

Quote:
What problem did you get?


With this .ini:
8 8 Ccd-b.bin
A 12 Adv1B.bin

the output of CAT 2 is:
-EXT FCN 2D
-CX EXT FCN
-TIME 2C
-CX TIME
-PRINTER-
-MASS ST 1H
--
-CTL FNS
-W&W CCD B
-ARR FNS
-HEX FNS
-I/O FNS
-ADV FNS
-XF/M FNS

If I switch the 2 modules with this .ini:
8 12 Adv1B.bin
A 8 Ccd-b.bin

the output of CAT 2 is:
-TIME 2C
-CX TIME
-PRINTER-
-MASS ST 1H
-CTL FNS
-ADV CONV B
-ADV MTRX
-ADV MATH
-ADV TVM
-EXT FCN 2D
-CX EXT FCN

You can see that I can have or CCD or Adv, but not all two together.
CCD OS/X is a great module, but I can't understand why the
old CCD-B can't work with Advantage. They have different page,
different XROM numbers, so ........ why..????

1234


#7

Claudio,

Have you tried using "10" instead of "A" to denote the second module location?

Regs,
ÁM


#8

You're right, Angel, of course. I didn't notice it ...

J-F


#9

Wow...was too much obvious!!!
(shame on me) :-((

Anyway I thank all for your help.

1234


Possibly Related Threads...
Thread Author Replies Views Last Post
  EMU41; Dosbox on Linux; Excruciatingly sloooow Geir Isene 9 1,097 12-01-2013, 05:10 PM
Last Post: Geir Isene
  9014B Sony Part Number Compatibility aj04062 0 317 11-08-2013, 05:59 AM
Last Post: aj04062
  Compatibility of new HP PRIME Cable Harold A Climer 8 969 10-13-2013, 01:14 PM
Last Post: Eric Smith
  HP10C series battery door compatibility? Bruce Larrabee 6 742 08-11-2013, 05:42 AM
Last Post: Bruce Larrabee
  Advantage/CCD Matrix Challenge Ángel Martin 1 379 08-09-2013, 06:22 PM
Last Post: Thomas Klemm
  HP-17bII+ Solve Compatibility Issues Robert Prosperi 7 878 04-22-2013, 10:11 PM
Last Post: Gerson W. Barbosa
  HP 41 Advantage module test RyanM 6 681 02-27-2013, 02:30 AM
Last Post: Angel Martin
  [Clonix/NOV] NoV-64 backwards compatibility Doug (NYC) 0 334 01-20-2013, 11:21 AM
Last Post: Doug (NYC)
  Emu41 Richard L. Taylor 6 687 06-30-2012, 01:04 PM
Last Post: Richard L. Taylor
  USB-41->NoV-64/Clonix-D compatibility Diego Diaz 5 654 06-15-2012, 12:18 AM
Last Post: Les Wright

Forum Jump: