ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT (The End)



#2

Regarding Philippe's ESCR-RSU-2 and mine.
I finally understood how they should work.
This model is a 64K RSU version.
Ordinary Eramco models have 6 outdoor switches.
Those have only 2 indoor switches :
----------------------------
| |
| |
| |
| |
---------[SW1]-[SW2]--------
| |
| |
| |
--------------

Disable Writing <- [SW1] -> Enable Writing
Enable 32K Bank #1 <- [SW2] -> Enable 32K Bank #2

Alas both are out-of-order.
The first one is only 12.5% functional and the other one is dead.
Regarding the first RSU-2, only pages E and F in bank #1 are available.
I used ES-RSU1A/2A (ES-41 Data Base 85), Hepax 1B/1C/1D, David Assembler Rom, Rambox (32), ES-MLDL OS, MLDL OS, ...
Always the same result... :o(
Thanks in any case for your mails.
I send a message to Philippe.


#3

Dear Emmanuel,

one question about the both internal switches of the Eroamco RSU : SW1 would be used for protecting the internal operating system. Is it correct, that SW2 only would needed for loading the internal operating system to bank #1 and bank #2 ? Because when the oerating system is stored to the RSU bankswitching would be realised by software commands...

May be you are able to fix the hardware failures of the RSU, by exchanging the chips with new chips. But I do not know if this special storage chips are available today...

With best regards - Christoph Klug


#4

Emmanual,

You could also try to send a mail to the designer of the Eramco ESCR-RSU: Martin Lennarts in the Netherlands. Maybe he still remembers.

Succes


Possibly Related Threads...
Thread Author Replies Views Last Post
  Hook-µP software by Rush Systems Lute Kamstra 5 824 11-29-2013, 01:30 AM
Last Post: Lute Kamstra
  HP 50g - select characters on the stack, copy/paste Sean Freeman 7 929 11-20-2013, 07:11 AM
Last Post: Sean Freeman
  Serious discussion regarding soft menus Tim Wessman 24 1,830 10-06-2013, 07:23 PM
Last Post: Helge Gabert
  [HP-Prime] Lack of user soft keys Andy B (Australia) 1 405 08-17-2013, 11:00 AM
Last Post: Tim Wessman
  HP85 tape reader; end of tape detection inaki 9 1,107 04-25-2013, 02:25 PM
Last Post: Paul Berger (Canada)
  HIGH END HPs.. Status Symbols?? John W Kercheval 13 1,267 05-09-2012, 12:55 AM
Last Post: Matt Agajanian
  End of my 32SII? kc 2 350 04-07-2012, 10:57 AM
Last Post: Jim Yohe
  50G--End of the HP calculator era? Say it aint so, Joe! Matt Agajanian 15 1,229 03-06-2012, 05:19 PM
Last Post: Harald
  the end of the world as we know it.... troy 1 349 02-10-2012, 06:25 PM
Last Post: Jan
  I Wish HP Higher End Calcs Were Solar-Powered! Jeff 3 450 01-31-2012, 03:51 AM
Last Post: Eric Smith

Forum Jump: