HP-67 display trouble: Help!



#4

Hi everybody,

After a successful card reader gummy wheel replacement, sometimes the display shows a very brilliant row of " --------------" (middle segment) when I turn on the machine.

Even if the calculator is off, when I push some keys, a dull red middle segment twinkles (-). ¿How can I do? ¿How can I fix this problem?

Thanks in advance,

Albert


#5

The 'g' segment (the one in the middle, used for the -ve sign) has a separate current control circuit, which is pair of transistors in the corner of the logic board. That, in turn is controlled by a resistor on the keyboard/display board.

Bad contacts between the keyboard/display and the logic board can cause this. Since you've just taken the machine apart to repair the reader, I would check the pins between the 2 boards carefully.


#6

Many thanks Tony,

There was a bad contact between the power plug-in and the display PCB (the ground wire). Now, the machine works fine.

Albert


Possibly Related Threads...
Thread Author Replies Views Last Post
  trouble flashing wp34s under Linux Glenn Becker 8 907 07-23-2013, 02:21 AM
Last Post: Marcus von Cube, Germany
  TVM WP34s trouble Jim P 4 630 06-28-2013, 07:31 AM
Last Post: fhub
  Trouble dumping Pioneer ROM via IR Neil Hamilton (Ottawa) 6 774 06-20-2013, 08:14 AM
Last Post: Neil Hamilton (Ottawa)
  41CL :TROUBLE IN FILE TRANsFER aurelio 22 2,091 06-18-2013, 03:44 PM
Last Post: aurelio
  Trouble entering a HP35s program line Arno 2 509 04-05-2013, 06:28 PM
Last Post: Arno
  wp34s reflashing trouble... Calckidd (USA) 3 464 03-04-2013, 04:32 PM
Last Post: CalcKidd (USA)
  [41CL] Trouble compiling CLWriter.cs Dan Grelinger 3 510 02-17-2013, 10:52 PM
Last Post: Dan Grelinger
  Trouble with RS-232/HP-IL Interface (HP 82164A) Hans Holzach 9 984 01-08-2013, 01:52 AM
Last Post: Marcus von Cube, Germany
  Can the display for a HP32Sii be replaced with the display from another model? Bruce Larrabee 8 982 10-10-2012, 10:05 PM
Last Post: Luiz C. Vieira (Brazil)
  HP 67 vs. HP 65 display Harald 4 553 03-26-2012, 02:41 PM
Last Post: Harald

Forum Jump: