HP41C Card Reader Problem



#4

I replaced a 82104 card reader's roller, and it seems to pull the card through OK, but when I try to read or write a card, I get "Malfunction". I cleaned the head with a head cleaning card, check all the head connections inside the reader, but I stil have the problem. Any clues ?. Thanks, John


#5

Well... I had the same problem...

Put fresh batteries and check it out... silly, but easy to repair...

Cheers John,

#6

There is a small piece of copper (1/2" long strip along length axis of card) that presses the card against the reader head.

I accidently caused this to become too flat (no spring action) on one the first card readers I repaired. If it does not push the card against the head, you will get a "malfunction" error.

You have to be careful when messing with that piece of spring copper. Too tight and it will scribe the card and leave a black line. Too lose and it will not press the card against the head.

If you have not touched that piece, this may not be your problem.

Good luck!


Possibly Related Threads...
Thread Author Replies Views Last Post
  Reasonable price for a 41C, Quad Mem, Time, Navigation and Card reader module? Eelco Rouw 10 2,321 12-12-2013, 01:52 AM
Last Post: Eelco Rouw
  hp-67 card reader problem. Marcel Samek 5 1,492 12-09-2013, 09:09 PM
Last Post: Paul Berger (Canada)
  HP-97 card reader pinch roller axle davorin 2 811 09-15-2013, 08:47 AM
Last Post: aj04062
  HP-97 Card Reader davorin 3 864 09-13-2013, 04:21 PM
Last Post: Stephan Matthys
  HP-67 Card Reader Repair Question aj04062 1 702 08-08-2013, 11:15 AM
Last Post: Randy
  Hp-67 card reader: tantalum capacitor identification Ignacio Sánchez 8 1,681 06-02-2013, 07:26 PM
Last Post: aj04062
  Testing card reader motor for 65 Michae Altmann 2 811 03-17-2013, 09:24 PM
Last Post: Randy
  Repaired HP-97 card reader doesn't show any signs of life jbssm 6 1,227 02-17-2013, 03:15 AM
Last Post: Alberto Fenini
  How to check / repair a HP 82106A module for HP41C calculator ? Eduardo Mingo 13 1,665 01-07-2013, 11:05 AM
Last Post: Diego Diaz
  A simple question about the HP41C or HP41CV Antoine M. Couëtte 6 1,140 12-16-2012, 04:06 AM
Last Post: Antoine M. Couëtte

Forum Jump: