AC Adapter for HP 9114B Disk Drive



#6

I own a HP 9114B disk drive without a AC adapter.
Which one is used for this device? Will the HP 82066B (the one used on other HP-IL devices) work with this unit?

Thanks

Mutsch


#7

Hi there,

Yes, this is the rigth one (for Europe 220v. mains!!)

Best.

Diego.

#8

Yes, Diego is right about the HP82066B.
I tested in read mode a direct power supply w/o battery : 6V-2A.
OK but not for NEWM a disk or storing data/programs on it.
Mfg.
Emmanuel

12345

Edited: 20 Feb 2005, 5:17 p.m.


#9

So what does that mean? Is the AV adaptor to weak for the drive or is the battery required to work properly?

Mutsch


#10

Hi again,

The (so-called) adapter/charger, is nothing but a simple transformer (8v 3VA nominal secondary specs.)

So you *MUST* have the "Rechargable battery pack" (88014A or B) fully charged to operate the drive.

The 9114 takes its supply from the battery. Transformer (82066B) just re-charge the battery while the drive is not spinning.

Hope this helps.

Diego.


Possibly Related Threads...
Thread Author Replies Views Last Post
  How to copy files from 9114B to hard drive via PIL-box? Joe Horn 23 2,620 12-14-2013, 11:57 PM
Last Post: Geoff Quickfall
  Need service information for HP 82161A Cassette Drive Peter N1 2 284 07-14-2013, 04:11 AM
Last Post: Tony Duell
  HP 9885M disk drive David Ramsey 0 203 05-12-2013, 09:38 PM
Last Post: David Ramsey
  Alignment disk and procedure for 9114A aj04062 1 243 03-28-2013, 04:54 AM
Last Post: Tony Duell
  No luck getting flash disk to work in 95lx Harald 7 739 03-18-2013, 08:11 AM
Last Post: Harald
  Updated PPC DVD Disk w/HHC2012 Materials Jake Schwartz 1 269 01-26-2013, 02:45 AM
Last Post: Walter B
  9114A Drive aj04062 4 725 11-17-2012, 07:48 PM
Last Post: Raymond Del Tondo
  PCMCIA SD adapter for 200 LX? wildpig 4 344 08-27-2012, 08:20 AM
Last Post: Bill (Smithville, NJ)
  HP-35 Charger/Adapter Repair (82002C) LHH 0 188 05-19-2012, 01:21 AM
Last Post: LHH
  200LX -- can't seem to access A: drive Glenn Becker 6 523 04-09-2012, 12:23 PM
Last Post: Glenn Becker

Forum Jump: