41 cx time



#7

My 41cx has lost time over a 24 hour span about 9 mins, this seems very excessive.
Is there any way to calibrate the timer?
I have a halfnut.

Thank You
GS Leong


#8

Hi, Leong;

there are two ways to "calibrate" the CX clock.

first one - enter the actaul time in the X-register and execute CORRECT at the exact moment this time is reached. CORRECT computes the difference between the internal clock and the value in the X-register, and uses the difference to balance the internal "ticks"

second one - use SETAF (set accurace factor). This function uses the value in X-register to force a "stable drift" and adjust any unaccuraces.

If you have the HP41CX Owner's Manual, Vol. 2, please check pages 238 and 376. If you don't have it, post again and we'll add more info.

Best regards.

Luiz (Brazil)


#9

Thank you Mr. Vieira for your time.

That is all the info I need on the subject.

GS Leong

#10

Hi GS Leong,

I am sorry but 9 mins per 24 hours can't be corrected by the functions CORRECT or SETAF.
SETAF can correct 84.375 seconds per day with the value SETAF = 0.1

The function CORRECT has the same range as SETAF.

Regards,
Thomas


#11

Were all the cx's bad about accuracy or is this one just way off?

Thanks
GS Leong


#12

I bought one in 1984 (fullnut, Singapore made) and it was fine.


Not as accurate as my wristwatch, but by twiddling the accuracy factor, I could get it to within a few seconds per day.

Yours probably has a bad crystal?

#13

>Were all the cx's bad about accuracy or is this one just way off?

My 41cx halfnut's clock is off by a couple of minutes per year with no correction factor. I only set it when we go on or off daylight savings time. Actually, I usually do 1 or -1 T+X.

#14

Hi GS Leong,

my 41 CX looses 1.07 s per day without correction.
With correction it is better than 0.03 s per day.

I make notes about the drift and I use the formula
on page 377 (HP 41 CX German handbook) to calculate
an improved AF (accuracy factor).

Kind regards,
Thomas


Possibly Related Threads...
Thread Author Replies Views Last Post
  [HP Prime]How to get Discrete-Time Fourier Transform uklo 0 241 11-18-2013, 08:02 PM
Last Post: uklo
  Date/time formats R. Pienne 4 326 11-01-2013, 12:43 PM
Last Post: Marcus von Cube, Germany
  How to set the Date.Time etc on a WP34S Harold A Climer 4 326 10-29-2013, 09:32 PM
Last Post: FORTIN Pascal
  Prime: Exam mode (possible duplicate after funny response first time) Paul Townsend (UK) 1 186 10-24-2013, 03:09 PM
Last Post: Tim Wessman
  Date/time programs for the HP 35s R. Pienne 0 148 10-03-2013, 02:37 PM
Last Post: R. Pienne
  Trading TI Nspire CX CAS for HP Prime Justin Sloan (Honolulu) 2 180 05-09-2013, 04:22 AM
Last Post: Chris Smith
  Nothing like passing the time away... Eddie W. Shore 2 180 03-21-2013, 08:23 AM
Last Post: Eddie W. Shore
  New compile-time options for WP-34S Nigel J Dowrick 15 654 01-29-2013, 03:25 PM
Last Post: Stephan
  Date & Time disappear on WP 34S René Franquinet 16 760 12-10-2012, 08:24 AM
Last Post: Walter B
  HP 41 CX Celso Cipolato 2 185 09-30-2012, 06:38 PM
Last Post: Thomas Klemm

Forum Jump: