Hp 49g: tranferring files



#2

Hi!
I have a problem: I want to copy a folder with subdirectories and files saved as equations on another hp 49 g calculator, but during the connection a msg box says that there is an error in one of the equations. Thus, it is impossible to terminate the process. If I erase this equation, the problem isn't solved because the same problem affect almost every file. How is it possible? These equations are written by equation-editor and if I can save theme, it means that they are correct.
I think that hp49g checks again files during the connection.
How can I avoid it?
How can I copy a folder (containing folders and equations) to another calculator without problems?

The equations work poperly on the first calculator.

Dennis


#3

Hi, Dennis;

chances are that the calcualtors have a different translation 'level', that can be set from 0 to 3, if I am not wrong. In this case, 'non-standard' codes like the one for "different of" is sent as \=/ (three bytes) if translation is set to 2 or 3 (I'm not sure about the exact code), or simply sent as a one-byte character (# 139) if no translation is required (Xlat set to 0). If the translation code is different, the receiver does not understand received data. In time: the translation is considered only in ASCII mode.

I remember having some problems when transfering data from an HP48G+ to an HP49G: errors everywhere. I solved them only after setting ASCII mode and Xlat 0. I also had problems with SysRPL data, but I'm pretty sure this has no solution.

Hope this helps.

Luiz (Brazil)

Edited: 7 Feb 2005, 5:36 a.m. after one or more responses were posted


#4

Hi Vieira, Luiz C.
Thank you for your advice! I have tryed to transfer the files after changing settings in the "applications" menu. With binary format and xlat set to 0, it works very well!

Thank you very much!

Dennis


Possibly Related Threads...
Thread Author Replies Views Last Post
  How to copy files from 9114B to hard drive via PIL-box? Joe Horn 23 1,599 12-14-2013, 11:57 PM
Last Post: Geoff Quickfall
  How to update PRIME Firmware using Files on PC Harold A Climer 2 242 12-04-2013, 12:05 PM
Last Post: Erwin Ried
  Loading .prgm files to the Prime Thomas Chrapkiewicz 8 438 10-25-2013, 09:34 AM
Last Post: Eddie W. Shore
  Proper location for files on the PC for Connectivity Kit ,etc. Harold A Climer 8 427 10-23-2013, 02:43 AM
Last Post: Marcus von Cube, Germany
  Updated PPC DVD Version 2.10: HP-41 Searchable Program Files and Scannable Barcode Jake Schwartz 3 247 09-27-2013, 09:51 PM
Last Post: Olivier (Wa)
  HHC 2013 speakers' files Joe Horn 2 201 09-26-2013, 02:51 AM
Last Post: Geoff Quickfall
  Nonpareil Rom files davorin 2 178 09-20-2013, 06:20 PM
Last Post: Didier Lachieze
  41 and 71B Overlays, DXF Files? aj04062 0 120 11-25-2012, 08:04 AM
Last Post: aj04062
  My HHC2012 Presentations and Files Namir 1 150 09-28-2012, 11:35 AM
Last Post: Eddie W. Shore
  HP42s input output of programs and files aurelio 17 587 09-01-2012, 10:18 PM
Last Post: Raymond Del Tondo

Forum Jump: