faulty 41cv memory chip



#2

Anyone does have a memory chip from a not functioning HP41CV labelled 1LE7-0005 or similar? is for repairing an HP41CV. When I do XEQ SIZE 000, it shows 255 steps only instead 319. Can I put a single memory module (HP82106A) on my HP41CV instead soldering a good memory chip?

thanks


#3

IIRC the (user) RAM chips in the 41CV are 64 registers each. You could remove the faulty one and fit a single memory module in the appropriate port (Port 4, here, I think).

Alternatively (and I did this once), you can crack open the memory module and desolder the PCB from the connector. Then wire the PCB's pads to the holes for the original RAM chip, inside the 41. You need to connect the B3 and B4 pads correctly to put the module at the right address (Look at the I/O assembly schematic in the service manual to see what I mean). That way you still have 4 external ports for ROMs or peripherals.


#4

B3 and B4 are two metallic connectors of the HP82106A memory module, right? The module has twelve connectors, 6 upper and 6 lower. What pins are B3 and B4? (They must be tied to VCC)
Also, what is the difference between a 1LE7-0005 and an 1LE7-0004 chip? Both are memory chips, have the same number of pins, but it seems to me that cannot be exchanged.


#5

If you take the memory module apart, you can desolder the connector from the PCB, leaving 12 pads in a line. 2 of those (or equivalently 2 of the pins on the connector) are B3 and B4.

I assume you have an HP41 service manual. The pinout of the port is shown there. B3 and B4 are labelled. If you can't find it, I'll look it up for you.

The memory chips inside the 41 are designed to respond to particular addresses. That's the difference, I think, between the -0004 and -0005 chips. Corresponding pins on the different RAM chips are linked together on the PCB, there is no external chip select logic.


#6

Thank you very much for your responses! Don´t worry, I have the HP41 service manual (PDF file).


#7

If you need any more help, please feel free to ask....

#8

PDF service to me, please?

[VPN]

#9

Hi,

I'll gladly send you a clean memory module (without housing) to do the job.

Just mail me with your address, and I'll drop a pair of'em into an envelope to you.

Best regards.

Diego


#10

Hola:

Mi dirección es: gonzalo_fernandez@apb.es, he intentado enviarte un email pero me da error.

saludos: gonzalo


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41CV - A Walk Down Memory Lane Tom Lewis 9 423 03-18-2013, 11:14 PM
Last Post: BShoring
  ACT CHIP aj04062 5 270 01-27-2013, 02:11 PM
Last Post: Eric Smith
  Classic calculator display chip type number? Juergen Hofstaedter 3 220 01-22-2013, 12:47 PM
Last Post: Eric Smith
  HP 32sII with faulty keypad aurelio 6 280 09-21-2012, 05:08 PM
Last Post: aurelio
  Faulty fullnut 41CV Paolo Cipollone 5 235 09-07-2012, 04:59 PM
Last Post: BobVA
  Faulty fullnut 41CV Paolo Cipollone 3 176 08-25-2012, 09:50 AM
Last Post: Luiz C. Vieira (Brazil)
  41 User Memory vs System Memory Gerry Schultz 6 346 07-01-2012, 12:02 AM
Last Post: Monte Dalrymple
  NoV-64: Can't Access RAM Chip 3 Les Wright 4 235 05-28-2012, 11:06 PM
Last Post: Les Wright
  HP48GX : faulty Port 2 ? any way to repair it ? Antoine M. Couëtte 4 235 01-13-2012, 10:56 PM
Last Post: Antoine M. Couëtte
  HP41CV faulty Steve Hunt 6 274 12-27-2011, 12:45 AM
Last Post: Kerem Kapkin (Silicon Valley, CA)

Forum Jump: