FLASH NEED UPDATE



#2

hello
my hp49g+ shows this

FLASH NEED UPDATE.
1.USB
2.CARD

BOOT VERSION:3.19
SERIAL:CN347......

i've got no sd card
what can i do ????


#3

Hook it up to a PC using the USB cable and the connectivity kit and load the 49g+ rom.

The ROM can be found on HP's site. Might also be at hpcalc.org.

www.hp.com/calculators

then go to the 49g+ site.

#4

Make sure that you have the latest update from HP's Web site available, and then update the flash ROM via USB.

By the way, do you any idea of how the 49g+ got into that state?

Regards,
James


Possibly Related Threads...
Thread Author Replies Views Last Post
  DIY HP 30b WP 34s serial flash/programming cable Richard Wahl 2 640 12-04-2013, 11:14 AM
Last Post: Barry Mead
  PRIME: re-format the flash drive to recover the operating system Harold A Climer 2 494 11-06-2013, 12:22 AM
Last Post: Michael de Estrada
  Bad Flash in HP Prime Han 11 1,074 09-27-2013, 12:38 PM
Last Post: Han
  Flash Flood Warning: 9/16/2013 (One Week from HHC13) Eddie W. Shore 8 842 09-17-2013, 09:20 PM
Last Post: Craig Ruff
  FLASH? command Andrew Nikitin 1 394 06-18-2013, 01:02 AM
Last Post: Walter B
  [EXCLUSIVE FLASH] Infos about new HP Prime ! Mic 16 1,233 04-02-2013, 11:06 AM
Last Post: Frank Boehm (Germany)
  No luck getting flash disk to work in 95lx Harald 7 954 03-18-2013, 08:11 AM
Last Post: Harald
  [41CL] Repairing an image in Flash Monte Dalrymple 0 255 01-24-2013, 07:01 PM
Last Post: Monte Dalrymple
  DIYx flash bootloader Eric Smith 11 759 09-19-2012, 07:01 PM
Last Post: Eric Smith
  DIYx flash bootloader Eric Smith 2 329 09-10-2012, 02:27 AM
Last Post: Walter B

Forum Jump: