41cx doesn´t recognise 319 registers



#4

I have an HP41cx fullnut that after doing SIZE 000, shows only 255 (it is missing 64 registers). I have reset the calculator with no luck, only shows 255 registers instead 319 registers. Also, EMDIR shows 124, so extended memory is OK. What memory chip/chips (upper, lower or both) I must change to repair the memory? Please see the photo http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5733774885&ssPageName=STRK:MEWA:IT

to let me know which of the 5 top memory modules I must change (each memory module comprised with two soldered chips)

thanks!


#5

According to the service manual figure 4-8f, table 4-5f and Diagnostic Test Procedure outlined on page 4-31 the D/S 5 is bad, which is U9. That should be the upper chip first from the left one that reads 1LH505.

1234

Edited: 28 Nov 2004, 10:57 p.m.


#6

Thank you very much for your responses!


Possibly Related Threads...
Thread Author Replies Views Last Post
  emu48 - copy stack doesn't work (as expected) Thomas Radtke 2 474 11-11-2013, 02:19 PM
Last Post: Thomas Radtke
  WP-34S Matrix operations with routine-local registers? Tom Grydeland 1 270 09-04-2013, 10:46 AM
Last Post: Marcus von Cube, Germany
  WP-34S: Subroutines, local registers and hotkeys Marcel Samek 7 510 08-23-2013, 12:08 PM
Last Post: David Hayden
  WP-34S: question - Initialization of local registers Marcel Samek 8 500 07-07-2013, 09:57 PM
Last Post: Steve Simpkin
  Anyone got a 39gII and doesn't mind memory loss? bhtooefr 4 385 05-19-2013, 03:57 PM
Last Post: bhtooefr
  Repaired HP-97 card reader doesn't show any signs of life jbssm 6 554 02-17-2013, 03:15 AM
Last Post: Alberto Fenini
  HP-41CV Doesn't go into PRGM or USER mode Matt Agajanian 4 318 03-15-2012, 11:39 PM
Last Post: Matt Agajanian
  35S I & J registers Matt Agajanian 5 367 03-05-2012, 05:14 AM
Last Post: Bart (UK)
  Vintage HP15C Key Clicks but Doesn't Register Bruce Zastera 15 781 01-27-2012, 06:18 PM
Last Post: uhmgawa
  WP 34S: Double precision registers - What are your feelings? Marcus von Cube, Germany 16 958 12-26-2011, 10:49 AM
Last Post: Dieter

Forum Jump: