Connect 48G(X) to USB?



#2

Can you connect a 48G(X) to a computer using a USB to serial converter?

Mike 1111


#3

Well, I can, and it works very well now. But I did have to update the drivers for the converter a few times to get the "Capture image..." part of HPComm to work with it, though it worked for file transfers. It's always worked with HyperTerminal PE, but I don't think that MS-DOS Kermit can find it. With the earlier drivers, trying to use a Conn4x USB connection to the 49g+ and the converter at the same time often resulted in a "Blue Screen Of Death", but the latest driver update cured that. Note that Conn4x works with the converter and the 48G series too (now). To take full advantage of Conn4x's features, install the XSrvr library (it's packaged with Conn4x) on the 48G series.

So it should work, but "Your mileage may vary".

Regards,
James

Edited: 30 June 2004, 7:45 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Gathering USB dumps for Connectivity Kit <-> 39gII communication... debrouxl 2 428 12-01-2013, 12:59 PM
Last Post: Marcus von Cube, Germany
  USB flashing/Li-po boards patryk 6 582 09-08-2013, 12:31 PM
Last Post: patryk
  USB Chargers for HP calcs Matt Agajanian 3 401 08-18-2013, 10:58 PM
Last Post: Craig Ruff
  USB vs DVD Han 9 808 04-19-2013, 06:05 PM
Last Post: Robert Prosperi
  File transfers over USB Charles C(UK) 5 491 08-10-2012, 08:04 AM
Last Post: Charles C(UK)
  HP41 / SY41CL Mini-B USB Power Connector (Module) Matt Kernal 5 1,289 07-08-2012, 06:23 PM
Last Post: Diego Diaz
  NoVRAM 64 USB programmer Gene Wright 4 401 06-29-2012, 11:43 AM
Last Post: Diego Diaz.
  USB-41 & ClonixConfig update (130612) Diego Diaz 6 551 06-17-2012, 07:08 PM
Last Post: Diego Diaz.
  USB-41->NoV-64/Clonix-D compatibility Diego Diaz 5 481 06-15-2012, 12:18 AM
Last Post: Les Wright
  USB-41 82143A simulation update: MAN-TRACE modes Diego Diaz 0 216 06-09-2012, 08:46 PM
Last Post: Diego Diaz.

Forum Jump: