Posts: 15
Threads: 2
Joined: Jan 1970
Hi Graham,
I recognized the company name as it's not too far from where I used to work. I wish I could help you with info on the module but regretfully cannot. I can however provide you with the following:
15730 Park Row
Suite 500
Houston, TX 77084
Tel: 281-599-1300
info@ogslab.com
Maybe someone at the company can provide the answers you are looking for... hopefully even a manual!! I hope this helps.
Posts: 133
Threads: 31
Joined: Jul 2005
Hi Graham.
I don't recall this module, however I suspect it is a drilling engineering module built along the same lines as the Petroleum module - arguably designed for reservoir engineers. If it is to be used for drilling engineering (as the Drilpro software), then there would be programs for BHA, cost/ft, ROP, direction, and drilling mud hydraulics. If these twig or look similar, then if you email me a listing of the programs, I'll try to work through some of the stuff with you.
I will see if I can find a manual. Being in an oil patch area, I might be able to find one somewheres...
12345
Posts: 307
Threads: 75
Joined: Jan 1970
Hi Graham
I´m working on a update of Wilson´s and Diego´s module list for HP-41. Could you please give us the exact datas of this module:
Label on the top:
Label on the back:
Module size:
What says CAT2:
You would help all of us.
Matthias