HP41 Emulator Application Card for HP48GX



#11

Michel Peltier, a French HP-41 enthusiast I met on the internet, is asking about some things I'm not familiar with. The text below should be a pretty good translation of his questions.

---------------------------------

I have a HP41CX and a HP48GX.
I bought a HP41CV Emulator Application Card HP82210A (for the HP 48 SX)
and the HP 8224A infra-red module which is also used to control the HP82240A.
The HP 41CX feed the HP82240A printer just fine.
The HP48 GX controls also the same printer...
but the HP41CX and the HP 48 GX do not communicate with each other !
Could somebody help me? Thank you in advance for any answer.


#12

Sorry, but your HP41 Emulator Application Card is possibly not a GX, but SX one. There was no release of a GX card, although there is a patch that let´s you work with the SX card on a GX...
I only know a very few persons, that own a real GX card....


#13

Hi Matthias,

What about the patch mentioned ? I'd really like to test it on my GX (works fine on my SX, of course).

Thanks a lot !
Marc


#14

As I know, the HP-41 Emulator card uses fix address points to jump at your SX. These addresses are not equal to the GX, so that´s why this card does not work on the GX. The patch must patch these address jumps to dynamic addresses. This makes the card much slower.
I do not have this patch, sorry. But if someone has it, please let us know it´s source.

Matthias

#15

Hi,

as Matthias mentioned, there was a patch version of the card image which let the emulator software run and display on a GX.

Please note that this patched version is only a hack of a few critical reserved RAM addresses. You can start the emulator on a GX, and maybe do some calculations, but you won't be able to use most of the other features of the program, like advanced functions, menus, or FOCAL progams.
And, of course it uses fixed addresses. Therefore you'll have to store the patched version at the start of port 1 in the right order to even run...

Regarding INPRT: As some other posters mentioned, the information traffic is one-way: From the IR printer module of the HP-41 to the input IR diode of the HP-48...

Regarding availability: The patched/hacked version of the emulator software once was available on some bbs, or maybe one of the Goodies Disks, I'm not sure.

Raymond (blank stare) (Ok, this was something for the die-hards;-)

#16

Can you give me precise details to get this patch? Thank you very
much. Michel.
Pouvez-vous me donner des précisions pour me procurer ce patch ?
Merci Beaucoup.

#17

Hi,

it would be very nice, if I also could use my emulator card on the GX model. I already tried that, but putting it into a covered port has problems.

Robert

#18

I know that I was able to copy the equation library card for the 48SX to a 128KB RAM card, and it worked just fine. Maybe the BUPORT program? Anyway, it was on one Joe Horn's Goodies Disks, which are available at hpcalc.org. What I'm thinking is that it ought to be possible to copy the 41 emulator code from the ROM card to a RAM card and change any entry points that need changing.

Regards,
James

#19

This Message was deleted. This empty message preserves the threading when a post with followup(s) is deleted.


#20

I have never been able to use the emulator card on the GX. I am certainly interested in the patch. Both the GX and SX can capture the print out from the 41 IR module without any problem using the INPRT program . I Garth is thinking of 2 way communication then no It won't work.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP48GX screen replacement Francisco Quiles 9 1,532 10-03-2013, 09:17 PM
Last Post: Francisco Quiles
  HP48GX Interface to a PC John W Kercheval 7 1,161 09-29-2013, 10:53 AM
Last Post: John W Kercheval
  HP 48G -- entering more than one equation into the PLOT application Randal B 1 479 01-24-2013, 12:25 AM
Last Post: Chris Dreher
  HP41 emulator for HP48sx - keyboard overlay needed Doug (NYC) 3 777 12-31-2012, 03:11 PM
Last Post: Allen
  HP48GX everything works perfectly except the 'ON' key? Bruce Larrabee 5 890 10-22-2012, 05:41 AM
Last Post: Bruce Larrabee
  The latest version of Free42 is now a OS X Universal application..... zeno333 1 500 10-21-2012, 11:12 PM
Last Post: Matt Agajanian
  HP41 Card Reader won't read and write Bruce Larrabee 5 915 07-31-2012, 06:33 PM
Last Post: John Robinson
  HP41 Card Reader not Pulling Card Colin Verrilli 14 1,670 07-29-2012, 05:53 PM
Last Post: Randy
  HP48GX Connectivity John W Kercheval 6 1,027 05-22-2012, 06:45 AM
Last Post: Michael Lopez
  Advice with HP41 Card Reader John Abbott (S. Africa) 11 1,248 04-06-2012, 04:20 PM
Last Post: M. Joury

Forum Jump: