What's the black conductive stuff in Pioneer keyboards?



#4

I'm attempting repair of a couple of Pioneer keyboards. (Taking 'em apart isn't so hard -- getting them stuck back together may be interesting!)

I've diagnosed at least one problem: the matte black conductive "dots" inside the mylar (or whatever) dimples on the bottom row have worn through under oft-used keys. It's deposited itself among the black interlaced "fingers" imprinted on the facing contact sheet.

Cleaning the contact sheet fingers with alcohol went nicely, and seems to have rejuvinated a formerly "dead" 32SII and a 42S. But the dimple dots have visible wear, with some areas lacking the black stuff entirely. Keypress detection for these keys is intermittent, at best.

An obvious solution is to replace the dimple sheet with a better one. But as you might imagine, these things are in rather short supply. Because the plastic itself seems in relatively good shape, I'm wondering whether I can re-coat the inside of the dimples with something adhesive, flexible, durable and conductive. (I assume all those properties are required, as well as perhaps some others I haven't come up with.)

Does anyone have any idea what the flat-black carbon-looking stuff is that is used to effect contact inside these Pioneer keyboard assemblies?

Any info or ideas re: substitutes will be appreciated!

Thanks.


#5

Paul,

I have not tried, but I think Caig´s Gold Pen would be a good candidate for fixing the "dots" - Newark had it. I have also found a dark grey conductive ink here in Brazil - it is graphite based, and after dry it looks very similar to the dots in the 48G keyboard mylar.

Good luck,

Renato


#6

The Caig Gold Pen is just a contact cleaner/corroison inhibitor. It will not restore a missing conductive thingy.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Pioneer Variants Mark Hardman 1 202 11-15-2013, 10:40 PM
Last Post: Randy
  HP PRIME - Bode and Black plots - first attempt dg1969 0 187 10-20-2013, 01:32 PM
Last Post: dg1969
  Trouble dumping Pioneer ROM via IR Neil Hamilton (Ottawa) 6 504 06-20-2013, 08:14 AM
Last Post: Neil Hamilton (Ottawa)
  Creeping black pattern on HP-11C screen Larry Gagnon 6 488 04-12-2013, 10:09 AM
Last Post: Peter Murphy (Livermore)
  HP 48GX with Black LCD - S/N ID Jeff Kearns 4 374 12-15-2012, 03:55 PM
Last Post: aurelio
  More Slide Rule Stuff... . .... Thomas Chrapkiewicz 1 258 09-25-2012, 03:41 PM
Last Post: Kiyoshi Akima
  2K==A lot of place for (HP-28C) stuff Matt Agajanian 4 335 05-21-2012, 09:59 PM
Last Post: Dominic Richens
  OT: Pioneer anomaly Jeroen Van Nieuwenhove 4 333 04-20-2012, 08:35 AM
Last Post: Walter B
  Hard or wanted CAS stuff Oliver Unter Ecker 9 587 04-16-2012, 04:32 AM
Last Post: Mike (Stgt)
  New stuff Matt Agajanian 8 541 03-17-2012, 02:22 PM
Last Post: Ángel Martin

Forum Jump: