Re: Early 32E



#3

It is not so bad, if the flexible cable between the battery pack and the circuits is broken. It can be replaced by 3 strips from thin multi core colored flat computer cable. You can make new connections on the tiny board in the calc. Just be sure you use a small soldering-iron of max. 20 watts. I have done this succesfully. Good luck.


#4

I took the "Leap of Faith" and snapped it apart today. It is the early unslodered chips/LED segement type. I cleaned everything up and gently tack soldered the segment to the board (I think this is where the poor contact was as some of the segment sections didn't light up unless I tapped the calc.) Got it back together and it works great now! I thank everyone who responed to this for their help. I think the older woodstock types are MUCH easier to take apart :)


Possibly Related Threads...
Thread Author Replies Views Last Post
  Layout of arithmetic keys on early calculators Walter B 10 1,930 11-20-2013, 11:13 AM
Last Post: Jake Schwartz
  HP50G early days vs Prime early days? Mike Powell 7 1,396 10-09-2013, 11:17 AM
Last Post: Eric Rechlin
  May be a little early ... Walter B 5 1,068 12-09-2012, 05:04 PM
Last Post: Paul Dale
  Non HP very early LCD Calc? Ian Phillips 6 1,397 10-06-2012, 01:57 PM
Last Post: Frank Boehm (Germany)
  HP45/32E Connection Matt Agajanian 2 857 07-07-2012, 06:31 PM
Last Post: Matt Agajanian
  32E's Normal & Inverse Normal Distribution Matt Agajanian 27 3,672 04-14-2012, 06:07 PM
Last Post: Dieter
  Bedtime for the 32E Matt Agajanian 10 1,591 04-07-2012, 05:57 PM
Last Post: Luiz C. Vieira (Brazil)
  Changing radix mark on a 32E Matt Agajanian 8 1,552 04-07-2012, 04:59 PM
Last Post: Walter B
  Does this HP-32E from eBay sound legit? Matt Agajanian 4 990 03-28-2012, 03:00 PM
Last Post: Lincoln R.
  21, 45, 32E--which should be next? Matt Agajanian 14 2,124 03-25-2012, 02:48 AM
Last Post: Thomas Radtke

Forum Jump: