Posts: 85
Threads: 8
Joined: Jan 1970
You might try setting the calculator to approx mode. Hold down right shift and press ENTER until display shows R~ at top. Hope this helps. rdb.
Posts: 4
Threads: 0
Joined: Jan 1970
I've experienced this problem also. It occurs when I attempt to download a file that is named the same as a reserved name on the calculator. For me, I was attempting to download a file named "MAIN".
It dosn't like this. Funny thing is, is that I can create a directory directly on my calculator named "MAIN" but just can't download one with that name.
Hmmm?!
I changed the name of the file from "MAIN" to "MAINENTRY" and the download works fine.
Posts: 71
Threads: 22
Joined: Jan 1970
I may have found something,But i don't know what i can do with it. There is the transfer set-up box ([APPS] choos 2 "i/o functions",and then select 5 "transfer". There you will find on the rightside of the screen "Chk:" . Here you can select the checksumtype. My calculator only disply's 3 dots next too the Chk fiels. Whene i put the cursor on the Chk field,and press F2 fore choos, a window appears, and i can select 3 checksumtype's. But i can choos what i like, but none of the choices will be put in the Chk field. The HP49g emulator, that also runs on ROM 1.17-B, state's in the checksumfield "3".
Erwin
Posts: 785
Threads: 13
Joined: Jan 2005
Hi!
You have an unallowed name. Either a reserved word OR a non-alphabetic name. Only dot is allowed as a separator (if your current radix is comma, then no dot, but comma)
I hope this helped