oncemore: HP41cv LCD



#2

Hi there when i switch my HP41 on some elementa of the characters fade out, especially the upper part of the / in the 0. This happenes to all digits. Bending and tweaking the calc a bit solves the problem for a while. In my experience it was always the contact-rubber between the driver-pcb and the display when i had such problems with various LCDs. How can i get to it in my HP41 ?

Thanks Peter


#3

Carefully remove the feet and there's a screw under each one. Try to ensure the rubber foot and the adhesive don't get separated when you're taking the feet off.

The case just comes apart. Remember which end the longer screws go it (it's pretty obvious). Don't tighten them too much when you do it back up (maybe the problem is that the posts they screw into are already broken??). The U shaped bit that goes between the two halves has a right way and a wrong eway :-)

There are notes somewhere (on this site?) about replacing the connection between the boards with a ribbon cable. Also check the connections to the LCD board. These can come adrift with very strange results.

#4

I had this problem just last week after reassembling a calculator. I thought it was the logic board, but when I replaced it, the problem remained. I then cleaned all contacts between the logic board and the keyboard, and between the keyboard and battery terminals, reassembled, and problem gone. Hope this helps - John


Possibly Related Threads...
Thread Author Replies Views Last Post
  hp41cv memory modules tim peterson 10 1,600 11-07-2013, 11:09 PM
Last Post: Garth Wilson
  Vintage HP 15C with bleeding LCD display Michael de Estrada 1 643 10-30-2013, 09:54 AM
Last Post: Jeff O.
  HP41CV Mike Powell 12 1,583 10-30-2013, 08:17 AM
Last Post: Mike Powell
  HP41CV Bry Sun 11 1,649 10-22-2013, 12:52 PM
Last Post: Geoff Quickfall
  Missing LCD segments (48 SX) Matti Övermark 2 653 09-18-2013, 03:50 PM
Last Post: Matti Övermark
  HP 32s LCD part Trisnadi Sutrisno 2 631 08-27-2013, 02:12 PM
Last Post: Han
  hp 39gii lcd clear question giancarlo 7 1,299 08-18-2013, 07:30 AM
Last Post: Mic
  10BII LCD Repair K Gobeski 0 450 06-19-2013, 08:58 AM
Last Post: K Gobeski
  HP 75d: pale lcd characters Michael Fehlhammer 0 420 02-25-2013, 07:04 AM
Last Post: Michael Fehlhammer
  HP41cv expiriences of a new user Wolfgang 28 2,820 02-13-2013, 08:02 PM
Last Post: Mike Morrow

Forum Jump: