hp85 hpil question and hp85-->hp75



#2

I have an hp85 (with i/o rom and 82938a hpil module). The hpil module works fine when setup to for the 85 to be the controller. When the hpil module is set to be the non-controller I get an error 114 (non active controller) which makes sense because the 85 is probably trying to access a drive through the hpil module and in order for it to do that it needs to be setup as the controller.

The reason I have the hpil module set to non-control is because I'm trying to setup communications with my hp75 (with i/o rom). With the 85 on, I turn my 75 on and it beeps and recognizes the 85 automatically as ":C1". However, when I try to send something from the 75 to the 85 with the following commands respectively:

75: output ':c1' ; "hello"
85: enter 9; a$

my 75 acts like it sent the string "hello", but my 85 just hangs until I perform a reset at which time the 85 returns with error 131 "time-out".

I've checked and my hpil module is set to address 9 and non-controller. My hpil cables are working too. I've even run the i/o exercisor program and the hpil module is error free. These are the commands reccomended in the hp75 i/o rom manual for 75->85 communications.

Any advice?

By the way, after writing the above message I re-tried the above commands but this time using my hp71 and everything works fine. Does the 75 not attach a CRLF or something?

Thanks,

Andy

Edited: 8 June 2003, 10:30 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP85 tape reader; end of tape detection inaki 9 1,597 04-25-2013, 02:25 PM
Last Post: Paul Berger (Canada)
  HP85 Programmable ROM cardtridge 82929A-service ROM not working- inaki 2 906 04-25-2013, 08:08 AM
Last Post: inaki
  HP85 Waveform Analysis inaki 1 561 04-23-2013, 01:20 PM
Last Post: Paul Berger (Canada)
  Authentic HP85 color? inaki 3 728 03-11-2013, 10:27 PM
Last Post: Calum Tait
  Hp85 PRM-85 board Roe Peterson 2 613 12-08-2012, 12:00 PM
Last Post: Roe Peterson
  HP75D with HPIL Karel Kupka 2 643 07-13-2012, 02:57 AM
Last Post: Karel Kupka
  HP75 Plug-Module Simulator Manual pdf Jake Schwartz 2 614 04-23-2011, 07:59 PM
Last Post: Paul Berger (Canada)
  HPIL-Devel BUFFER Question Ángel Martin 7 1,008 02-09-2011, 04:35 AM
Last Post: Mike (Stgt)
  HPIL, HPGL Mike (Stgt) 4 755 12-09-2010, 03:55 AM
Last Post: Mike (Stgt)
  HP-IL 71B to 71B via HPIL Geoff Quickfall 11 1,632 12-01-2010, 06:55 PM
Last Post: Michael Meyer

Forum Jump: