HP 42S & 82240B Printing Test?



#2

Hi! I have both of these devices, and cannot figure out how to test to see if the printer will work with this calculator. Obviously I'm doing something wrong. The printer powers-up, and will feed paper, but does not respond to the calculator. I must admit, I cannot figure out how to use this calculator (again, the BA in art proves unhelpful!). I did perform the "self-test," and it seemed to pass. Any clues? Thanks!

Gregg


#3

I don't have the 42s infront of me at this time, but there is a print menu that is accessed by using the orange shift key and I think the minus key. When you have the menu active scroll through the menu until you find the printer on (prton) setting activate this setting. The rest of the menu should be explain itself. Be sure to turn the print mode off (prtoff) when you are done with the printer. This will turn off the power to the IR interface and prolong battery life. Hope this helps.


#4

Richard & Randy,
I have concluded you are both geniuses!! Your instructions worked perfectly, and so do the 42S and the printer. Thank you for your help!

Gregg

#5

Self test the printer:
With the power off, press and hold the form-feed button on the right side. Turn on the power and now release the form-feed button. The unit will self-test and print a character map and the battery level. 5 is the highest. Replace the batteries if you are 2 or below.
On the 42S, press:

  1. Shift,- (print}. Press the scroll down arrow 2 times.
  2. The menu should read PON POFF MAN NORM TRACE.
  3. Press the E+ key to activate PON (printer on).
  4. Press LOG to set MAN mode.
  5. You should now be back to a normal screen.
  6. Press shift,- to access the print menu.
  7. Press the LOG key to print the stack contents or any of the other menu picks there to do whatever you want.

As Richard mentioned, don't forget to disable printing when not needed, especially when in trace mode.

Repost if you help more...


Possibly Related Threads…
Thread Author Replies Views Last Post
  Use 82240B as computer printer R. Pienne 3 2,396 12-09-2013, 12:19 PM
Last Post: Marcus von Cube, Germany
  Printing the HP Prime manual BobVA 3 1,842 10-25-2013, 09:53 PM
Last Post: BobVA
  HP-42S ESD self-test Yriarte 2 1,608 10-24-2013, 09:08 AM
Last Post: Yriarte
  So I took a test with my Prime today ... kris223 12 3,642 09-25-2013, 07:19 PM
Last Post: kris223
  Best way to test HP-71B RAM modules (the 32K/96K ones etc.)? Philippe Lasnier 4 2,467 09-25-2013, 09:54 AM
Last Post: Philippe Lasnier
  Concern about Voyager keyboard test Matt Agajanian 2 1,470 08-30-2013, 07:56 PM
Last Post: Matt Agajanian
  3D printing custom molds Han 3 1,723 08-02-2013, 03:26 AM
Last Post: Bruce Larrabee
  Printing HP 9825 data Norman Pillsbury 3 1,595 06-01-2013, 10:08 PM
Last Post: David Ramsey
  Voyager Self Test Mike (Stgt) 5 2,036 05-16-2013, 03:28 PM
Last Post: Mike (Stgt)
  Does IR printing not work on your converted WP34s? Then read on... Harald 3 1,680 04-04-2013, 05:46 PM
Last Post: Harald

Forum Jump: