HP-71B-Programming ROWDRV (Display driver)



#8

Hello all,

I’m studying the HP-71B internals, especially the display driver. To do that, I try to modify/improve existing LEX and got stuck with one particular entry. While studying the DSPLEX that changes the behaviour of the display (such as “small fonts, invert etc) I was surprised how easy the implementation of the small font feature was. Changing fonts from normal to small is achieved just by setting ROWDRV to the value “0000800360041008”.

What does the ROWDRV entry point for the HP-71B. The IDS volume 1 says : “Row lines (16 nibbles). Should be set by software as follows: 8001400220041008”. This is set accordingly in “LCDINI” (see IDS volume 3 page SB&DVR-34) and says “Bit pattern for driving display”.

Notice that the hex sequence is symmetrical from the middle (: 80014002 Vs 20041008).

Is there anybody that can give a definition of the pattern and how it affects the display behaviour ?

Thanks

Alain Robillard


#9

Is this operation possible with the bare bones machine ?
Thank you.


#10

Hello,

Is it possible with the bare bones machine? I would guess so, the operations to switch to small font is :

SMA    LCHEX  0000800360041008 * Small constant
STORE D1=(5) ROWDRV * Point to row driver
DAT1=C 16 * Write out C and return
nxtstm GOVLNG NXTSTM * return to main loop

so, technically, just a poke to ROWDRV (E2350) with the proper value is required.

Regards

Alain Robillard


#11

Opps!,

wrong address for ROWDRV, it is NOT E2350 but 2E350.

ROWDRV = 2E350.

Also, a simple poke does the joke as far as SMALL is concerned. But, you must enter the reverse string :

Poke "2E350", "8001400630080000" will put the HP-71B display in small font mode.

Regards !

Alain Robillard

#12

Hello all,

CHHU Chronicle V2N1 page 30 gives all the details about ROWDRV for the HP-71B. I tried a couple of funny examples too.

Regards

Alain Robillard


#13

Sounds interesting! Are these chronicles anywhere available in the web?

Holger


#14

Well,

not on the WEB, but you could have all this (and much more) with the PPC CD-ROM Set. You should never leave home without it (and your HP-71B) !

Here is the link http://www.waterw.com/~jakes/ppccdrom.htm


Regards

Alain Robillard


Possibly Related Threads...
Thread Author Replies Views Last Post
  Can the display for a HP32Sii be replaced with the display from another model? Bruce Larrabee 8 1,455 10-10-2012, 10:05 PM
Last Post: Luiz C. Vieira (Brazil)
  HP-IL 71B to 71B via HPIL Geoff Quickfall 11 1,636 12-01-2010, 06:55 PM
Last Post: Michael Meyer
  Question about programming the HP-71B Namir 27 2,892 11-28-2010, 01:50 PM
Last Post: Egan Ford
  16 segment Led display would mimic a HP-41 display? Giuseppe Marullo 3 837 11-12-2009, 08:08 PM
Last Post: db (martinez, ca.)
  Anode and cathode driver chips interchangeable on Classics? Dan W 0 368 08-08-2009, 01:45 PM
Last Post: Dan W
  Atmel ARM7 LCD driver: alphanumeric display Michele Signorini 4 698 05-18-2009, 10:09 AM
Last Post: Michele Signorini
  Atmel ARM7 LCD driver Michele Signorini 35 3,544 11-26-2008, 02:59 AM
Last Post: Reth
  Programming of CMT EPROMS for 71b PeterP 2 536 04-04-2007, 10:40 PM
Last Post: PeterP
  Custom Programming vs. Pre-packaged programming Eddie Shore 3 753 01-24-2005, 03:42 AM
Last Post: Karl Schneider
  Special Driver for 9114B disks? Ray 4 628 07-22-2004, 01:12 PM
Last Post: Ray

Forum Jump: