How do I get HP42 programs on a HP48GX



#5

I have a lot of programs on my HP42S and I would like to use them without the need to re-write them all over again for the HP48GX. Transferring with "inprt" from the HP42S to the HP48GX is no problem. But I like to "run" the programs. There is something for HP41 programs but I can't find that as well.

Menno


#6

There is (or once was) an HP-41 emulator for the HP-48SX.

However it doesn't work with the GX.


#7

Steve, Once you have the programs in a 48SX, can you beam them to a 48GX (and do they work then?) Regards, Jan


#8

no, it's a card and gives you an HP-41CV inside your HP-48SX.

It's essentially an interpreter for the HP-41 code. It also does NOT understand synthetic instructions.

#9

I've never understood what's the problem putting the card in a GX. Is it programmed in assembler ?

I think, I should dig mine out and simply try it out.

(Hints are welcome anyway)

#10

So, it seems that I have to write all my programs again in RPL. Is there really not something which can just translate FoCal to RPL ? Computerprogram perhaps ? Programming the 42 I'll do with ease, for that RPL I'll drown in possibilities.

Menno


#11

I could try to port your programs, but if it's commercial, I would have to get commercial too (and I'd have to expect some cash)

If it's simply private, it would be free, but limited, just because all the hp stuff begins to take more and more of my time.

Sorry, but I didn't want to spam the forum. I hope, I didn't step on somebody's toes with this message.

Generally I'd encourage you coding the progs new, just because of the comfort of the 48 (especially larger display)

BTW: why don't you want to use the 41 anymore ? It's a great machine.


#12

Thanks, I'll first try to get the program from HrastProgrammer if that doesn't work out I'll ask you again. And I don't have a 41; I have a 42 which I still think is the best calculator. Maybe because I understand the 42 completly know where every function is and what it does, I even know how to speed it up (temporarely). I was allways wrestling with memory; if you have just 1Kb free you cannot do a big matrix-calculation or integration. In my work as chemical engineer I use that part or function(s) often. In a meeting it doesn't show off (like the 48) that you are doing something more than primary-school calculations. (a 48 will draw attention; 42 not)

It may sound funny but I am far more careful with my 42 than with my 48!

Thanks again in advance, I am now on hunt for that program from HrastProgrammer.

Menno


#13

Try http://www.geocities.com/hrastprogrammer/ (it looks like there's quite a variety of emulator stuff here).

#14

There is an excellent emulator written for the 48 & 49 series of calcs to allow 41 programs to run on the newer calcs.

HP-41C/CV MicroCode Emulator for HP-49G and HP-48S/SX/G/G+/GX (Version 1.10) Copyright (C) 1983-1999 by HrastProgrammer

All test programs (normal and synthetic) worked perfectly. There are 3 basic versions of the emulator: full version for HP-49G called HP41E49, full version for HP-48SX/G+/GX called HP41E48 and Lite version for HP-48S/G called HP41E47


#15

Where can I get that program ???

Menno


#16

www.hpcalc.org/hp-49/apps/misc

Look in hp48 pages for 48 emulator

Good Luck!!


#17

I Have the 41CX-simulator running on my 48GX and asked HrastProgrammer if he has a 42 version. Because I like the double-line display far more than the single-line display.

Menno


#18

I thought he could make use of the 48/49 display to view the whole stack at once


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP48GX screen replacement Francisco Quiles 9 2,000 10-03-2013, 09:17 PM
Last Post: Francisco Quiles
  HP48GX Interface to a PC John W Kercheval 7 1,508 09-29-2013, 10:53 AM
Last Post: John W Kercheval
  HP48GX everything works perfectly except the 'ON' key? Bruce Larrabee 5 1,064 10-22-2012, 05:41 AM
Last Post: Bruce Larrabee
  HP48GX Connectivity John W Kercheval 6 1,396 05-22-2012, 06:45 AM
Last Post: Michael Lopez
  copyrom.lib on hp48gx David Griffith 0 483 04-03-2012, 07:31 PM
Last Post: David Griffith
  HP48GX : faulty Port 2 ? any way to repair it ? Antoine M. Couëtte 4 1,008 01-13-2012, 10:56 PM
Last Post: Antoine M. Couëtte
  hp48gx pc cable tim peterson 2 698 05-11-2011, 07:06 PM
Last Post: tim peterson
  Backed into corner on HP48GX Don Jennings 17 2,526 09-01-2010, 11:39 PM
Last Post: M. Joury
  Here's a rare HP48GX Han 5 1,110 03-09-2010, 10:05 PM
Last Post: Namir
  Serial no of HP48GX matti 4 891 02-15-2010, 02:54 PM
Last Post: matti

Forum Jump: