HP 100LX problem



#2

I am trying to install a CF card into my HP 100LX. For that I need a driver, but I can not transfer it to the calc as I have no serial cable. I can not put the driver on the card because without the driver the card will be not initialized. My solution to this problem was to send the driver to my HP 48GX and then transfer it via Irda to 100LX. I succeeded but the driver is not running properly. I discovered that during the transfer the file got additional 60 bytes. HP 48 adds some bytes at the beginning of the file and in the end as well. I tried to remove the additional bytes but without success. Any solution to my problem?

Thanx


Possibly Related Threads…
Thread Author Replies Views Last Post
  Opening a 100LX David Ramsey 4 1,562 11-29-2011, 12:34 PM
Last Post: Hubert Weikert
  HP 100LX and CF cards Chris Foley 6 1,966 05-21-2009, 07:07 PM
Last Post: BruceH
  HP 100LX Mike T. 2 1,158 07-14-2008, 05:38 PM
Last Post: Peter A. Gebhardt
  HP 95LX/100LX/200LX and alternate I/O Dave Shaffer (Arizona) 3 1,275 08-18-2004, 08:38 PM
Last Post: Andrés C. Rodríguez (Argentina)
  97 Card Reader Problem (NOT gummy problem) Peter Khor 5 1,739 10-04-2000, 11:03 AM
Last Post: ErikWahlin

Forum Jump: