HPILLINK.EXE (HP82477A HP-IL LINK SOFTWARE)



#9

Does anybody know how to patch the HPILLINK.EXE program to get it running on today's fast PCs (fast is >12 MHz)? This program worked with the HP-IL Interface ISA Card HP 82973A, but it seems to contain a software timing loop which was conceived for slower machines and now causes owerflows and character losses in the transfer. It may also be a HPILLINK workalike or replacement.

The only working solution I know is to install the card on a slow computer and shuffle the files with floppies or a network.


#10

are you sure, that it is a software problem and not a hardware problem?

greetings

Georg

#11

The software only works on the slower old machines unfortunately, I have not seen anyone refer to a work around for this.


#12

It could very well be a hardware problem that is causing the software to lockup and fail. Ten years ago, many PC's came with a "turbo" switch which dropped the ISA bus speed from 10MHz to 8 and the processor speed to half the full speed. Some motherboards still have a turbo jumper that is unused by the computer manufacturer. In a desperation move, you may want to look for this jumper on your motherboard, and short it to slow down your machine.

#13

LS,

I think I solved the problem of interfacing the hpil card with a fast (450 MHz) computer. Going back to starting dos from MS-DOS mode after closing windows 98 works well on my compaq 5286. Working in a DOS box gives unpredicted results, e.g. echoing characters. At the moment I can print and display HP files on the screen of my compaq. Saving and retrieving files does not work at the moment; I am trying to find an old DOS with assign B to A executable.

Henk Schellen


#14

There used to be a little DOS program called 'goslow' which inserted delays into every BIOS call (slowed space invaders to my speed :)). Might be worth a try? Additionally try telling the BIOS setup to put wait states into every memory access and switch off the BIOS in ram option.


#15

Might also be a good idea to turn off memory caching (that _REALLY_ slows down modern PCs)

However you might never talk to me again after waiting for it to boot.

Let me know how you go. I've got one of these cards too.

#16

LS, I think I solved part of the interfacing problem. With the older software I had (HPLINK.EXE) it was possible from a dos session outside windows98 to display and print files from HP to PC. I did not succeed in file exchange by the drive option. (Until now I did not have the chance to try the in the manual suggested assign drive option (with an older dos)) On ftp://ftp.math.jyu.fi/pub/hpil/ I found software for the HP71 to use the interface card. The software (HPILLINK.EXE)works well from dos outside windows98 and it is now possible to have full access to and from HP71 to PC on my 450 MHz Compaq. The interfacing with HP41 is a bit more cumbersome. By a printing to file option it is possible to upload files from HP41 to PC.

Hope it will help a bit,

Henk Schellen


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Prime - usbtool.exe bluesun08 21 2,024 12-11-2013, 12:33 PM
Last Post: Namir
  Hook-µP software by Rush Systems Lute Kamstra 5 612 11-29-2013, 01:30 AM
Last Post: Lute Kamstra
  HP Prime Connectivity software in Virtualbox/wine Chris Pem10 2 406 11-22-2013, 02:20 PM
Last Post: Chris Pem10
  Prime: Pedagoguery Software pop up banner Matt Kernal 1 338 10-20-2013, 01:54 AM
Last Post: Mic
  How to move lexfiles from PC to 71 w/o HP-IL? Joe Horn 9 827 10-18-2013, 03:50 PM
Last Post: Christoph Giesselink
  latest prime software release? Geoff Quickfall 3 476 10-12-2013, 03:53 PM
Last Post: Tim Wessman
  Does the HP Prime software only work with Win 7/ 8 ? Michael de Estrada 3 489 10-12-2013, 02:52 PM
Last Post: John Ioannidis
  Prime Software Buttons kris223 2 352 09-21-2013, 08:19 PM
Last Post: Jonathan Cameron
  Hand Held Products RS232 to HP-IL aj04062 11 934 08-31-2013, 07:12 PM
Last Post: Paul Berger (Canada)
  Latest HP Prime "emulator" software available :) Adrien Bertrand 46 2,715 08-21-2013, 10:48 PM
Last Post: Joe Horn

Forum Jump: