HP67 card reader problems


This is probably a common question, but what can I do to fix my HP67 card reader? It appears to be gummed up with who knows what - not sure if it is lubricant which has flowed or if the rubber wheels have turned to jelly. Cards will not pass through. Is there any hope?


Look further down here and in the forum archives and also check the article on the repairs page of this site.


Your card reader pinch-roller has turned to goo. I have made the repair on a 41 card reader, but never a 67. I have heard there are many more small parts in the 67 so be careful. Randy



Actually, the HP-65/67/97 readers are easier to repair than the HP-41. The reader mechanism is pretty much the same, but I found that they're somewhat easier to disassemble/reassemble.

The small parts (like the small vynil roller and balls) need to be watched in any case. One of the quickest ways to kill a vintage calculator is to try and disassemble it, for instance, in a room with a carpeted floor!


Possibly Related Threads...
Thread Author Replies Views Last Post
  Reasonable price for a 41C, Quad Mem, Time, Navigation and Card reader module? Eelco Rouw 10 2,516 12-12-2013, 01:52 AM
Last Post: Eelco Rouw
  hp-67 card reader problem. Marcel Samek 5 1,636 12-09-2013, 09:09 PM
Last Post: Paul Berger (Canada)
  HP67 eBay auction Cristian Arezzini 3 1,125 12-08-2013, 03:47 PM
Last Post: Raymond Del Tondo
  HP67/97 M.E. Pac cover Ignacio Sánchez 2 797 11-22-2013, 04:04 AM
Last Post: Ignacio Sánchez Reig
  HP-97 card reader pinch roller axle davorin 2 882 09-15-2013, 08:47 AM
Last Post: aj04062
  HP-97 Card Reader davorin 3 946 09-13-2013, 04:21 PM
Last Post: Stephan Matthys
  HP-67 Card Reader Repair Question aj04062 1 765 08-08-2013, 11:15 AM
Last Post: Randy
  Hp-67 card reader: tantalum capacitor identification Ignacio Sánchez 8 1,828 06-02-2013, 07:26 PM
Last Post: aj04062
  Testing card reader motor for 65 Michae Altmann 2 885 03-17-2013, 09:24 PM
Last Post: Randy
  Repaired HP-97 card reader doesn't show any signs of life jbssm 6 1,354 02-17-2013, 03:15 AM
Last Post: Alberto Fenini

Forum Jump: