42's bug?



#8

Could you, please, try this?:
Give wrong arguments for function COMB(ie: 1.2 enter 3 COMB)
so you get "Invalid data".
Now, give good arguments (like 9 enter 7) What's happen?

Thanks
Raul


#9

This is a well documented bug; please have a look here
http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/articles.cgi?read=266

and here
http://www.finseth.com/~fin/hpdata/hp42s.html

Hope this helps,
Massimo


#10

Hi, Massimo;

as I was typewriting my post, you were a faster trigger!

Best regards...


#11

You're welcome Luiz!

BTW: you beated me on the 32Sii vs 42S question ;) 1-1

Greetings,
Massimo

#12

... and J. F. Garnier (if I am not wrong) have already mentioned some experiences with it. Also, Graig Finset's HP42S database mentions something about it. I extracted part of the file: (may I, Craig?)

BUGS/ROM-Versions::

Bug/2 (as in 1/2 a bug): Clear REGS (do CLV "REGS") and execute \GS+.
RCL now recalls the contents of registers 00 through 120,930 (indirect
above 99). You convert a hexadecimal address to a register number by
dividing by 16 and adding a constant (183 on the reporter's system,
but may vary). Exit this mode by setting SIZE to any non-zero amount.
Interesting addresses:

1FFC2 to 1FFFF copyright notice
40300 to 40309 speed nybble, contrast nybble, clock

Do COMB or PERM with X > Y. You correctly get "INVALID DATA". Now do
X<>Y. Do COMB or PERM again. It should work. Instead, you get
INVALID message again. EXIT + \v/x does not clear this condition.
However, any arithmetic operation it! [reported by Rich Homard,
b645zjo@utarlg.uta.edu; posted to Comp.sys.handhelds on 29 Oct 1991]

John W. Loux adds: Some of the earlier HP42S calculators had this
problem. This problem was fixed at one point. However, in a later
HP42S update, the problem reappeared. It seems that a combination of
hardware and software caused the problem. When the hardware problem
was fixed, the software problem reappeared! As far as I know, there
are no plans to fix the "bug" on the basis of the simple workaround.
The problem resurfaced in late REV B calcs and all REV C --- somewhere
between #3011 and #3055 is my understanding.

Hope this helps.

Best regards.

Luiz C. Vieira - Brazil


#13

Well, thanks to both of you: I'm newby with the 42...
Is the next behaviour documented too?
(CAUTION: possibly you lose the memory!)
a) ClearSigma
b) Choose the linSigma mode in the Stat menu.
c) Write a Nx2 matrix with stat data and press Sigma+
What is happenning now? Pess MEM in Catalog menu...
Raul

#14

Looks like it is related to Bug/2 (see Craig Finseth's site at previous post)...

My compliments! You are a true bug smasher :-)

Greetings,
Massimo


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-67's Flag 3 to HP-41/42 Equivalent Matt Agajanian 2 364 03-29-2012, 06:29 AM
Last Post: Dieter
  HP 82240B. Infra red printer for HP 42---HP 50g Stuart Sprott 20 1,550 04-29-2010, 01:52 PM
Last Post: Vieira, Luiz C. (Brazil)
  HP41/42 Unit Conversion Egan Ford 36 2,545 03-30-2009, 11:30 AM
Last Post: Martin Pinckney
  Need help transitioning from 41/42 to 33/35 Bill Colisch 2 334 10-13-2007, 12:27 PM
Last Post: Bill Colisch
  Microchallenge 41/42: nr of digits Werner 3 464 09-14-2007, 04:35 PM
Last Post: Howard Owen
  HP-97 and HP-42 Gerry Schultz 4 533 06-06-2007, 10:54 AM
Last Post: Jim Creybohm
  Key Sounds in a 42 Ron 5 573 01-03-2007, 10:07 AM
Last Post: Ron
  42.4242424242 Gerson W. Barbosa 9 712 09-18-2006, 07:09 PM
Last Post: Gerson W. Barbosa
  Emu48 1.42 and WINE - It Works! Howard Owen 0 182 09-02-2006, 10:21 PM
Last Post: Howard Owen
  HP42S program (Survey-Quik Calc 42) K Kelley 2 360 08-26-2006, 10:48 PM
Last Post: Todd

Forum Jump: