HP-41 module covers and side port cover



#2

While repairing an old HP-41, I needed to create 3D models for the side port and module port covers. I have upload these models to:
http://www.thingiverse.com/thing:194323.

Test prints on my 3d printer worked well in ABS plastic. I am also working on a battery holder/cover, but it is currently about 1/10 of an inch too wide; once it is correct I will also upload that file


#3

Hello Nate,
Good job! How does the printed pieces looks like?

Thanks

Giancarlo
From the cappuccino state


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 709 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  HP67/97 M.E. Pac cover Ignacio Sánchez 2 217 11-22-2013, 04:04 AM
Last Post: Ignacio Sánchez Reig
  request M.E. pac for HP-67/97 wallet cover scan Ignacio Sánchez 0 153 11-06-2013, 09:36 AM
Last Post: Ignacio Sánchez Reig
  flood side-effects (not completely OT) Kiyoshi Akima 6 369 11-05-2013, 12:06 AM
Last Post: Kiyoshi Akima
  Side effects of the HP Prime Harald 9 423 11-04-2013, 12:01 PM
Last Post: Harald
  HP-67/97 Mechanical engineering PAC cover Ignacio Sánchez 0 141 10-30-2013, 04:35 AM
Last Post: Ignacio Sánchez Reig
  Yet another benchmark port on the wiki: Savage Pier Aiello 35 1,275 09-26-2013, 03:22 AM
Last Post: Pier Aiello
  HP 50G serial port programming Chris Smith 2 208 06-15-2013, 02:47 PM
Last Post: Chris Smith
  OT: RPN port to Casio fx-cg10/20? Matt Kernal 4 260 04-30-2013, 12:16 PM
Last Post: hugh steers
  HP-42S with Electroluminescent screen and simple I/O port Jose Poyan 8 403 03-27-2013, 07:11 PM
Last Post: Jose Poyan

Forum Jump: