HP67 Black Label on Back



#4

Need to replace the black label of my US made HP67. Anybody has one? Pls let me know.


#5

I fear your not going to get one unless you scan one and have it printed on a metal foil. The alternative would be to buy a defunct 67 and exchange the backs of the machines. If you do have a foil made up you will probably be able to recoup the cost of production by selling extra copies!


#6

I had given some thought to this a while back, and came up with the following idea:

1) Buy a sheet of sticky back label paper from Avery. 2) Spray paint it with a good quality lacquer-based silver paint and let it dry thoroughly. 3) Laser print over top of that.

The only possible problem I see is if the printer melts the paint, but I don't think it would as long as the paint is a lacquer.

Use at your own risk

Stefan


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP67 eBay auction Cristian Arezzini 3 503 12-08-2013, 03:47 PM
Last Post: Raymond Del Tondo
  HP67/97 M.E. Pac cover Ignacio Sánchez 2 379 11-22-2013, 04:04 AM
Last Post: Ignacio Sánchez Reig
  HP PRIME - Bode and Black plots - first attempt dg1969 0 213 10-20-2013, 01:32 PM
Last Post: dg1969
  Creeping black pattern on HP-11C screen Larry Gagnon 6 559 04-12-2013, 10:09 AM
Last Post: Peter Murphy (Livermore)
  Getting back to the CL Geir Isene 6 539 03-20-2013, 07:02 PM
Last Post: Geir Isene
  HP 48GX with Black LCD - S/N ID Jeff Kearns 4 438 12-15-2012, 03:55 PM
Last Post: aurelio
  Another technique of HP-33S label saving x34 6 521 10-11-2012, 11:09 AM
Last Post: Luiz C. Vieira (Brazil)
  HP-11C Back Screws John Swisher 0 240 09-12-2012, 10:52 AM
Last Post: John Swisher
  I am back ;) with a problem on HP 41 ;( wildpig 7 606 07-09-2012, 11:30 AM
Last Post: Mike Morrow
  HP67 motor in HP65 card reader - too slow Harald 4 526 05-21-2012, 06:52 PM
Last Post: Dave Shaffer (Arizona)

Forum Jump: