Tapping the Advanced Graphing App restarts the calculator



#6

Got my calculator yesterday and was playing around with it today generally following examples in the user manual. After a while I noticed that the calculator switches off and restarts when I click the Advanced Graphing App Icon. Tried a reset by "on" and "symb" with no result. Also tried to reset using the pin hole at the back. Still the same result when clicking the Advanced Graphing App icon. All other icons work fine (or at least does not restart the calculator).

I then connected the calculator to my computer using the Connectivity kit. Whilst the calculator shows up in the Connectivity Kit window, when I proceed to click on the arrow expanding the calculator contents, the calculator restarts. Downloaded the latest firmware and updated the calculator, all to no avail. The behaviour is exactly the same.

Settings; Standard Number format, Textbook Entry, Decimal Integers, Radians. Changing these around has had no effect.

Any suggestions for what to do next? Is there a setting I may have inadvertently changed etc..?

By the way should the clock be reset if a new firmware is installed, as I notice that it has remained correct throughout.

Thanks for any help.


#7

Strange.

Only thing I can think of is some bad data in there. Have you pressed the backspace key on it? Should allow you to reset that specific one and clear out the data.

TW


#8

Thanks for quick reply. Yes I have tried, same result it resets the calculator. I have also tried to reset all the other Apps first, but still the calculator resets each time I click on the Advanced Graphing App


#9

You can bypass loading any files on boot. Do ON-APPS together to reset, and then hold the backspace key. To make sure it worked, if you had something on the home screen it should have disappeared. That should be completely empty then.

There is also a procedure to "format" the flash drive if that doesn't work.

TW


#10

Thanks Tim

Tried that but that reset does not seem to work. The stack is still intact. I have also tried to remove the battery for some minutes but still no joy. You were referring to a formatting procedure, maybe that is the next step?

Thanks for your help

Terje


#11

Timing must be off. It is a bit tricky sometimes. The paperclip is always easy though.

To get into the factor test menu with the format, hold C F O while the unit is booting. Then 4 for FLS utility, and 3 for format.

TW


#12

Thank you very much. That did the trick

Cheers,

Terje


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime: =f(x):=expression in spreadsheet app CR Haeger 1 1,745 12-05-2013, 07:53 AM
Last Post: cyrille de Brébisson
  HP 41 Advanced Programming Tips Michael Fehlhammer 0 1,194 11-28-2013, 06:11 PM
Last Post: Michael Fehlhammer
  HP PRIME: APP program code DISAPPEARS !! Joseph Ec 0 1,217 11-25-2013, 11:35 AM
Last Post: Joseph Ec
  HP prime: linear solver app Alberto Candel 1 1,455 11-21-2013, 01:57 AM
Last Post: Michael Carey
  HP Prime graphing bug BruceH 1 1,513 11-19-2013, 08:14 AM
Last Post: Joe Horn
  OT: Graphing calculator for Android ? Ivan Rancati 4 1,915 11-18-2013, 12:33 PM
Last Post: Alberto Candel
  HP Prime: Linear Solver app bug BruceH 0 1,166 11-15-2013, 06:36 PM
Last Post: BruceH
  3D graphing planned for HP Prime Mic 5 2,088 11-11-2013, 10:17 AM
Last Post: Tim Wessman
  HP Prime - CAS functions in Spreadsheet App CR Haeger 6 2,502 11-11-2013, 12:37 AM
Last Post: Michael de Estrada
  HP Prime - Geometry App inconsistence bluesun08 4 1,841 11-10-2013, 01:48 PM
Last Post: parisse

Forum Jump: