So, latest 41CL / Library 4 config is...


Library 4 in port 4 of course.

then what?

Angel, time for a good summary for people who happen upon this later. :-)


Well I´m out of pocket until October, so in the mean time the documentation at TOS should do the trick. There´s a Library'4 writeup there, plus the PowerCL and SandMath manuals include instructions to configure them.


ed: tried adding the link here but no cigar...

Edited: 16 Sept 2013, 5:29 a.m.


I only see the 2H.



I think that -2H was the last non-banked version. CLUTLSBx is the bank-switched version. In the CL it is placed at 0x114000, which is outside the range of memory available on V2 boards. So if you want to load it on a V2 board you'll need to find four adjacent pages and update the IMDB entry. Or, (and this is the simpler way) you can flash it starting at address 0x0E4000 and use the XXXF mnemonic to plug it in.



got hold of a WiFi spot..

Monte was kind enough to host the PowerCL Manual:

Possibly Related Threads…
Thread Author Replies Views Last Post
  HP-41CL setup troubleshooting Xavier A. (Brazil) 2 1,887 12-02-2013, 06:29 AM
Last Post: Xavier A. (Brazil)
  Library#4 Modules mass-update and New Overlays Ángel Martin 0 1,242 11-09-2013, 05:55 AM
Last Post: 'Angel Martin
  [41CL] New Extra Functions version Monte Dalrymple 0 1,099 11-08-2013, 04:32 PM
Last Post: Monte Dalrymple
  [HP Prime] Constants Library Values Timothy Roche 24 7,353 11-02-2013, 04:17 PM
Last Post: Les Koller
  [HP-Prime CAS] Vector Calculus Library CompSystems 7 2,746 10-31-2013, 12:48 PM
Last Post: Han
  Equation Library/App for the Prime Harold A Climer 3 1,723 10-30-2013, 10:14 AM
Last Post: CompSystems
  Equation Library on the PRIME Harold A Climer 0 1,051 10-26-2013, 10:01 AM
Last Post: Harold A Climer
  latest prime software release? Geoff Quickfall 3 1,639 10-12-2013, 03:53 PM
Last Post: Tim Wessman
  CASplus Library for HP-Prime CompSystems 1 1,204 10-05-2013, 12:44 AM
Last Post: CompSystems
  The Rich HP Calculator Library Eddie W. Shore 0 872 09-27-2013, 10:19 PM
Last Post: Eddie W. Shore

Forum Jump: