Making new mini cassette tapes



#3

I have about 20 brand new mini cassette tapes (Fluke) that fit the 82161a drive. The problem is they are not HP and are a tiny bit too short.

That results in them not having enough tape to get through the initialization process. At least I assume that is why they fail? I get some sort of end of tape error at the end. They clearly run to the end and then fail.

What I was going to do was to measure one of my old HP tapes and try to lengthen these tapes by splicing a length from another tape. One tape should be enough to lengthen 5 or 6 tapes.

Anyone else ever try this?


#4

Mike, have a look at this http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/forum.cgi?read=24257

Massimo


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-65 Video Tapes - Anyone have a Copy? Bill (Smithville, NJ) 3 449 10-09-2013, 07:40 PM
Last Post: Paul Berger (Canada)
  HPCC Mini Conference 2013 hugh steers 6 466 09-13-2013, 04:27 PM
Last Post: BruceH
  Need service information for HP 82161A Cassette Drive Peter N1 2 280 07-14-2013, 04:11 AM
Last Post: Tony Duell
  Picture from the Mini-HHC (LA) Geir Isene 11 707 07-07-2013, 01:06 PM
Last Post: Jim Horn
  WP-34S Overlay - making it a bit more permanent? Marcel Samek 1 239 07-05-2013, 09:02 PM
Last Post: htom trites jr
  How much would making a one-off calculator cost? KoenDV 17 1,056 06-03-2013, 05:35 AM
Last Post: Nick_S
  OT - Converting 9 track 6250 bpi tapes Marcel Samek 0 157 05-31-2013, 08:26 PM
Last Post: Marcel Samek
  Athana DC100A Tapes inaki 6 398 03-14-2013, 01:55 AM
Last Post: David Ramsey
  My birthday, so a little commemorative mini-challenge ! Valentin Albillo 43 2,160 03-07-2013, 03:44 AM
Last Post: Walter B
  WP 34S mini-challenge (B) Gerson W. Barbosa 17 900 12-27-2012, 04:39 PM
Last Post: Marcus von Cube, Germany

Forum Jump: