10BII LCD Repair



#2

I picked up a 10BII at a garage sale on Saturday. Only a few segments of the LCD appeared when I replaced the batteries. Apparently this is a common problem with this calculator.

I recently obtained a Philips TSU3000 remote control which has a similar common problem: the touchscreen fails over time. The ribbon cable from the touchscreen is glued to the touchscreen pads and contact is lost as the device ages. The fix for this is to pierce the ribbon cable at the touchscreen pads using a needle or
something like an X-Acto knife. The cable is pierced through to the pads on the glass. I repaired mine using a sewing needle (there are only four pads).

I wondered whether the 10BII failure might be a similar bonding problem, so I used an X-Acto knife to pierce both ends of the ribbon cable for each trace. When I had finished, the display worked correctly. It passes the self-test.

I thought it might be worthwhile to mention this technique as potentially applicable in similar situations.


Possibly Related Threads...
Thread Author Replies Views Last Post
  10bii Financial Calculator is on launch sale - 0.99$ only John 4 309 11-10-2013, 08:02 PM
Last Post: BShoring
  Vintage HP 15C with bleeding LCD display Michael de Estrada 1 233 10-30-2013, 09:54 AM
Last Post: Jeff O.
  Missing LCD segments (48 SX) Matti Övermark 2 215 09-18-2013, 03:50 PM
Last Post: Matti Övermark
  HP 32s LCD part Trisnadi Sutrisno 2 221 08-27-2013, 02:12 PM
Last Post: Han
  hp 39gii lcd clear question giancarlo 7 493 08-18-2013, 07:30 AM
Last Post: Mic
  any open source HP 10BII emulators? John 15 777 06-12-2013, 09:58 AM
Last Post: Kimberly Thompson
  HP 75d: pale lcd characters Michael Fehlhammer 0 124 02-25-2013, 07:04 AM
Last Post: Michael Fehlhammer
  HP 48GX with Black LCD - S/N ID Jeff Kearns 4 274 12-15-2012, 03:55 PM
Last Post: aurelio
  On calculator preservation (LCD darkening, pouches...) Marc Ferrer (France) 4 285 12-04-2012, 08:01 AM
Last Post: Marc Ferrer (France)
  Non HP very early LCD Calc? Ian Phillips 6 372 10-06-2012, 01:57 PM
Last Post: Frank Boehm (Germany)

Forum Jump: