Testing card reader motor for 65



#4

The card reader in my HP 65 isn't responding at all. I removed the back and unsoldered the wires attached to the card reader motor. Then I used jumper wires to bring 3.5V to the motor, positive where there was a red wire. I get no response. That seems indicative of a burned out motor. Right? Or is there some way that it jams up? The rubber wheel will also need replacing, but it doesn't seem worth taking everything apart if the motor is dead.


#5

It does sound like the motor is bad. Does the shaft move smoothly when you manually give it a spin ?

Cheers,
john

#6

Does it draw any current? A no load motor (removed from calculator) should draw 5-10 ma. If there is no current draw, twist the shaft with voltage applied and see if it will start to run. Many times an older motor that has been exposed to corrosion or a nasty environment will have dirty armature contact and manual rotation of the shaft may be all it needs to make brush contact and run.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Reasonable price for a 41C, Quad Mem, Time, Navigation and Card reader module? Eelco Rouw 10 599 12-12-2013, 01:52 AM
Last Post: Eelco Rouw
  hp-67 card reader problem. Marcel Samek 5 355 12-09-2013, 09:09 PM
Last Post: Paul Berger (Canada)
  HP-97 card reader pinch roller axle davorin 2 239 09-15-2013, 08:47 AM
Last Post: aj04062
  HP-97 Card Reader davorin 3 230 09-13-2013, 04:21 PM
Last Post: Stephan Matthys
  HP-67 Card Reader Repair Question aj04062 1 186 08-08-2013, 11:15 AM
Last Post: Randy
  Hp-67 card reader: tantalum capacitor identification Ignacio Sánchez 8 452 06-02-2013, 07:26 PM
Last Post: aj04062
  Repair my HP 65 motor? Michae Altmann 1 166 04-13-2013, 10:03 PM
Last Post: aj04062
  Repaired HP-97 card reader doesn't show any signs of life jbssm 6 334 02-17-2013, 03:15 AM
Last Post: Alberto Fenini
  [WP 34S] New GCC - Testing required Marcus von Cube, Germany 3 217 01-07-2013, 01:59 PM
Last Post: Marcus von Cube, Germany
  HP 65 card reader problem H Fischer 3 222 11-24-2012, 12:11 PM
Last Post: H Fischer

Forum Jump: