HP-41 CMT EPROM & ZEPROM Programming



#5

I have some CMT EPROMS that I would like to program, but have no fixture or programmer.

I do have a ZEPROM programmer, and programmed a couple of modules several years ago. Either as a trade or independently, I should be able to program ZEPROM modules again.

Does anyone (or know of anyone) who has a CMT EPROM programming fixture?

Related question: The modules that I have are 16K CMT-10 modules, and are currently programmed to fill the address space of two adjacent ports. From the little documentation that I have, it appears that these cannot be used in a bank-switched mode (probably missing the hardware?). Does anyone know if it is possible to turn off one half of the module so that it only uses the address space of the port that it is plugged into, 8K?


#6

Sorry I don´t know of anybody with a CMT programmer ¡ sure I´d also like to program the one I have... would be great if one source is identified- or if Diego would build a next-gen one !

Cheers,
ÁM


#7

Quote:
...or if Diego would build a next-gen one
The next-gen one is called "Clonix" , and the "overnext" generation is called "NoVRAM"...

#8

Hi all,

Sort of "nostalgia-involved" in these latest posts... ;-)

Though one can have cheaper and easier solutions, there still is some kind of "challenge" in getting a piece of true-vintage-tech back to functional life...

The fixture for the CMT-10 module programming is not a "difficult" project but it's not "easy" either due to the tight mechanical tolerances.

I'd also be happy to have one built for my several (now useless) CMT-10 modules, but currently I'm really short of time... and still have some pending and delayed projects for the USB-41.

Will also have to finish and publish the full four bankswitched Clonix configuration utility (within the next couple of weeks).

Cheers from the Caribbean Sea.

Diego.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 711 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  HP 41 Advanced Programming Tips Michael Fehlhammer 0 140 11-28-2013, 06:11 PM
Last Post: Michael Fehlhammer
  Programming CMT EPROM modules for HP-41 Paul Berger (Canada) 4 297 01-22-2013, 06:04 PM
Last Post: Paul Berger (Canada)
  shelf life time of a ROM, EEPROM, EPROM vs Mask Rom Guido (Canada) 6 362 01-11-2013, 04:09 PM
Last Post: Thomas Falk
  Series 80 EPROM cards Paul Berger (Canada) 0 137 12-08-2012, 07:50 PM
Last Post: Paul Berger (Canada)
  Zengrange Zeprom Question aj04062 4 209 11-10-2012, 07:06 PM
Last Post: aj04062
  CMT RD-128 Manual Philip Reagan (Texas) 1 137 09-07-2012, 12:08 AM
Last Post: Sylvain Cote
  CMT EPROM Info Sought Namir 5 274 05-18-2012, 03:34 AM
Last Post: Namir
  Anyone know anything about this HP41C RAM / EPROM ROM SIMULATOR? Bruce Larrabee 11 430 09-30-2011, 02:25 PM
Last Post: Ángel Martin
  CMT-300 Owner's Manual Juergen Keller 1 147 09-02-2011, 01:20 AM
Last Post: Ángel Martin

Forum Jump: