Help with printer 82143A



#2

Hello,

I just got a 82143A printer with no AC Adaptor/Charger.
Does anyone knows if I can buy a regular adaptor?
What would be the specs fot it?

Thanks for any help,

Silvio


#3

I thought almost all of the HP 41C/CV/CX devices used the same power supply adapter, the 82059A/B. These can be found on eBay on a regular basis.


#4

The 82059A/B will also work with the HP-91/92/97 series, along with most HP-41 peripherals. You will also need a good battery pack to operate the printer.

#5

Hello, Silvio (are you in Brazil too? Perhaps a brazilian one?)

The specification that comes with the three AC adapters I have are:

82059B (comes with some printers) - 90-127VAC input (7Watts) - Output: 3W, 8VAC

82040B (Made in Brazil) - 90-127V AC input - Output: 3VA, 8VAC

82056B (sold in Europe) - 220V AC input - Output: 3VA, 8VAC

If you need some measurements (output current with load, voltage drop, etc.) let me know.

Best regards.

#6

Better to use the 82059 C or D. The "D" is the most common plug you will find. Some of the A and B units will not plug into the 82143A because there is no gap between the plug contacts. A little razor knife work cures that problem.

#7

Thank you all.
I'll try to get a 82059 on e-Bay.

Silvio


Possibly Related Threads...
Thread Author Replies Views Last Post
  82143A Gamble Paid Off! Les Wright 4 553 10-13-2012, 01:25 AM
Last Post: Michael Lopez
  Charging Current in HP97, 82143A, 82162A Les Wright 5 733 06-17-2012, 02:11 PM
Last Post: Les Wright
  USB-41 82143A simulation update: MAN-TRACE modes Diego Diaz 0 327 06-09-2012, 08:46 PM
Last Post: Diego Diaz.
  HP-41 USB-82143A info released. Diego Diaz 4 648 02-28-2012, 09:03 PM
Last Post: Diego Diaz
  HP-41 > USB printer simulation (82143A) Diego Diaz 25 2,282 02-17-2012, 06:38 PM
Last Post: Diego Diaz
  HP41c Printer 82143A connector details Prabhu Bhooplapur 2 443 06-16-2011, 10:11 PM
Last Post: Eric Smith
  Box for HP 82143A printer dinamarco 2 428 02-28-2011, 08:46 AM
Last Post: dinamarco
  82143A printer roller replacement James Grenert 4 648 12-06-2010, 02:23 AM
Last Post: Ignazio Cara (Italy)
  82143A Printer Output Confirmation Requested Egan Ford 2 447 06-17-2009, 09:42 AM
Last Post: Egan Ford
  Printing on a 82143A with HP-75C Giovanni Jimenez 1 300 02-27-2009, 04:35 PM
Last Post: Winfried Maschke

Forum Jump: