neat project for the HP48



#7

Has anyone thought about rewriting the HP48 ROM? If Raymond is reading this -- perhaps incorporate Speed UI into a custom ROM. It has been a while since I worked on HP48 hardware (and software), but I imagine it would not require too much work given the right tools (sadhp to decompile the old ROM and then make adjustments to "update" to a custom ROM). We could even borrow ideas from the HP49/50 series (e.g. flash pointers).

I have designed PCBs for single-chip 512KB memory upgrades (128KB Port 0, 128KB Port 1, and 256KB Port 2), and could work on putting together a mini-daughter board with a switch to swap between built-in ROM and the new ROM.


#8

Hi Han,



if you update the display to a higher resolution screen, then I am in.

I know that this would require rewriting the display handling code.



I believe - no, I know - that what you are proposing could be done
much easier with the 49G architecture (giving it a 48 housing ;-).



Regards,

Andreas

http://www.software49g.gmxhome.de/


#9

Quote:
if you update the display to a higher resolution screen, then I am in.

Count me in on that one.

#10

You have mail:-)

#11

I've been toying with the idea of creating an 32-bit, byte-addressed RPL system and then trying to port something like the HP-48G to it. This would be a big project because of both changes. The size of all objects would change and they'd be expressed in bytes instead of nibbles. My fantasy would be get the 48G code running with 32-bit RPL running natively on the 50g hardware.

All that stands in my way in the dozen or two full-time RPL and assembly developers who'd be needed to make this happen.... :)

Dave


#12

I have always wanted to one day have the time to convert the HP50G from running emulated Saturn code to running pure ARM code. I imagine I would run into problems with the Kinpo OS.

But for the HP48, the ROM is relatively smaller (even more so for the HP42S). I am currently trying to write my own HP42 emulator for the HP48/HP50 (yes, I know Hrastprogrammer has an excellent one, but I'm more in it for the learning experience).


Possibly Related Threads…
Thread Author Replies Views Last Post
  FRAM71 Project aj04062 1 1,246 11-25-2013, 01:59 PM
Last Post: Hans Brueggemann
  [HP-PRIME] QPI project CompSystems 0 896 10-09-2013, 02:51 PM
Last Post: CompSystems
  RPN-1200 Project Benoit Maag 0 851 08-25-2013, 01:05 AM
Last Post: Benoit Maag
  What do you think of this project??? Pierre 1 1,189 11-21-2012, 06:58 PM
Last Post: Eddie W. Shore
  TI 2550III project, help me I can help you. watchdoctor 2 1,442 10-19-2012, 10:13 PM
Last Post: Joerg Woerner
  What do you think of this project??? Namir 10 2,819 09-16-2012, 03:56 PM
Last Post: Eddie W. Shore
  WP-34s: Project donation page W. Bruce Maguire II 5 1,892 04-26-2012, 07:01 PM
Last Post: Geoff Quickfall
  USB-41 Module, project status update. Diego Diaz 8 2,672 04-06-2012, 10:17 AM
Last Post: Diego Diaz
  OT: TI Dataclip (TI1700) project Alberto Fenini 1 1,038 01-16-2012, 08:18 AM
Last Post: Alberto Fenini
  Science Project with HP41CX and Arduino? Fouad M. Kaadou 9 2,997 01-04-2012, 04:04 AM
Last Post: yves

Forum Jump: