HP-67 Shiny Spot on Face



#2

I recently got an HP-67. One cosmetic problem it has is a shiny spot on the front face between the "E" key and the "SST" key. A couple pictures are here:

https://picasaweb.google.com/lh/photo/C-RthKo3OFAsPESnjXWb3DJFQUrqvbY7ReWm5TggMMM?feat=directlink

https://picasaweb.google.com/lh/photo/RtH8bbztg4XbOkKQf2DUHTJFQUrqvbY7ReWm5TggMMM?feat=directlink

Has some outer finish worn off in this area? Is there any way to restore the matte finish to this area?

Edited: 3 Aug 2012, 5:20 p.m. after one or more responses were posted


#3

Hello Colin, may you format properly the liks to the pictures in your post? thank you


#4

Quote:
may you format properly the liks to the pictures in your post? thank you

Does this work?


#5

Thanks, works great!

#6

Some possible solutions: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv019.cgi?read=160724#160724

Search the archives for more posts from Geoff on classic restoration. Tons of good material there. Someday, it might even become a book ;-)


#7

Quote:
Someday, it might even become a book ;-)

Geoff, give us a IBAN for the reservation...what's about the last chapter?
I'll give you the GPS point of my home, drop me a prewiev please when you fly on this area :)


Edited: 4 Aug 2012, 6:43 a.m.

#8

Thanks for the pointer! I was not using the right search terms.

Looks like I may have made it worse by using 409 :(

At least the label did not come off. I'll try spraying with matte lacquer once I have it apart to fix the card reader.


#9

Quote:
...Looks like I may have made it worse by using 409 :(

Without a doubt. You're lucky the white lettering didn't melt away.

Check out the ingredients: http://www.biosci.ohio-state.edu/~safety/MSDS/FORMULA%20409%20CLEANER.htm

#10

Here are a couple pictures of the face after disassembling, cleaning and spraying with Matte Clear Lacquer paint. Not perfect, but better!

Also got the card reader working while apart.
Thanks for help!


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP 12C Platinum Programming v. Gold Face Dean Lewis 10 3,529 11-03-2013, 07:30 PM
Last Post: Kimberly Thompson
  Shiny new 16C! Keith Midson 7 2,673 10-27-2013, 02:22 AM
Last Post: Keith Midson
  For the Collectors (Spot the 35 & 48) Les Bell 1 1,106 10-11-2008, 02:55 AM
Last Post: Walter B
  Face panel on 12C Joe Lorincz (Australia) 5 1,763 10-22-2006, 09:03 PM
Last Post: Joe Lorincz (Australia)
  HP42S Face Plate Brendon Hutton 4 1,434 06-20-2003, 07:21 PM
Last Post: Vieira, Luiz C. (Brazil)
  Spot welder for batteries? John Ioannidis 8 2,463 09-16-2002, 01:45 PM
Last Post: David Smith
  HP48S face plate Scott 0 748 04-30-1999, 01:36 PM
Last Post: Scott
  Repair of Brushed Alum. Face??? Scott B. 8 2,554 04-10-1999, 03:08 PM
Last Post: Joe P

Forum Jump: