HP75D with HPIL



#2

Dear,

I have been using HP7470A plotter with HP71, HPIL and 82169A (HPIL/IB interface). I wanted to connect the plotter with my HP75D, but don't know how to address it. With 71B I use commands like:

printer is :15
print "PDPU"

Do you have any idea what to use instead in HP75's Basic?


Thanks.


#3

Hello Karel,

From memory, you cannot directly address, from it's position in a loop, a device with the standard HP-IL commands of the HP-75C/D.

You must first do an "assignio"and fill up hole in the addresses with fake names.

setup: 1:HP82161A, 2:HP82169A, 3:nothing, 4:nothing, 5:HP7470A

type: assignio ':ca,:ib,:x1,:x2,:pl'

type: printer is ':pl'

type: print "PDPU"

If it's not working, I can configure your setup at home late tonight and make it works.
I will suggest to change the plotter IB address to a lower one so you have less filling to do.
Let me known if the above solution worked.

Sylvain


#4

Hi,

Yes, this was the solution.

assign io ':pl'
did not work indeed, but
assign io ':ca,:ib,:x1,:x2,:pl' or even
assign io ':ca,:pl'

works perfectly. Big thanks.
Karel


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP75D AT&T Version Alberto Fenini 6 251 04-19-2011, 06:15 AM
Last Post: Alberto Fenini
  HPIL-Devel BUFFER Question Ángel Martin 7 257 02-09-2011, 04:35 AM
Last Post: Mike (Stgt)
  HPIL, HPGL Mike (Stgt) 4 192 12-09-2010, 03:55 AM
Last Post: Mike (Stgt)
  HP-IL 71B to 71B via HPIL Geoff Quickfall 11 442 12-01-2010, 06:55 PM
Last Post: Michael Meyer
  HP75 HPIL IO Tony de Groot 6 276 04-25-2009, 05:02 AM
Last Post: Tony de Groot
  A webserver running on a HP-41 and HPIL patch for nonpareil Khanh-Dang Nguyen Thu-Lam 10 357 02-01-2009, 12:59 PM
Last Post: Khanh-Dang Nguyen Thu-Lam
  HPIL to RS232C ( HP 48GX) NACHO 0 86 11-02-2008, 03:08 PM
Last Post: Nacho
  EMU71 HPIL error Sean Connor 3 160 06-09-2008, 04:26 PM
Last Post: Sean Connor
  HP 71B HPIL questions and the HPCC! Geoff Quickfall 12 429 04-23-2008, 09:37 AM
Last Post: Christoph Klug
  Connect 9825 with HPIL Tape Drive Karel Kupka 2 144 06-03-2005, 10:24 PM
Last Post: Eric Smith

Forum Jump: